To set up wireless card access:
1.
From the Advanced tab, select Advanced Setup > Wireless Features.
2.
Click the Set Up Access List button.
3.
Select the Turn Access Control On check box.
If the Turn Access Control On check box is selected, and the access control list is blank,
then no wireless computers or devices can connect to your wireless network.
4.
To add computers or devices to the access list, click the Add button.
The Wireless Card Access Setup screen displays.
This screen displays a list of currently active wireless computers and devices and their
Ethernet MAC addresses.
C3000 WiFi Cable Modem Router
Advanced Settings
50