Setting The Unit Before Use; Date And Time; Voice Guidance Language - Panasonic KX-TG3021C Operating Instructions Manual

TG302X_303XC(e).book Page 14 Monday, December 25, 2006 1:30 PM
Preparation
Setting the unit before
use
Important:
L To program features by scrolling
through the display menus, see page
23.
Display language
You can select either "English" or
"Français" as the display language.
The default setting is "English".
1
KX-TG3021/KX-TG3023/KX-
TG3024
{MENU} i {0}{8}
KX-TG3031/KX-TG3032/KX-
TG3033
{MENU} i {0}{8}{1}
2
{V}/{^}: Select the desired setting.
3
Press the right soft key to save. i
{OFF}

Voice guidance language

Available model:
KX-TG3031/KX-TG3032/KX-TG3033
You can select either "English" or
"Français" as the voice guidance
language of the answering system. The
default setting is "English".
1
{MENU} i {0}{8}{2}
2
{V}/{^}: Select the desired setting.
3
{Save} i {OFF}
Dialing mode
If you cannot make calls, change this
setting according to your telephone line
service. The default setting is "Tone".
"Tone": For tone dial service.
"Pulse": For rotary/pulse dial service.
14
1
{MENU} i {0}{5}{1}
2
{V}/{^}: Select the desired setting.
3
{Save} i {OFF}

Date and time

Set the correct date and time.
– To use the available alarm function
(page 27).
– When you play back a message from
the answering system (page 29), the
unit announces the day and time it
was recorded. (KX-TG3031/KX-
TG3032/KX-TG3033)
1
{MENU} i {4}{1}
2
Enter the current month, day, and
year by selecting 2 digits for each.
Example: August 15, 2007
{0}{8} {1}{5} {0}{7}
3
Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
{0}{9} {3}{0}
4
{AM/PM}: Select "AM" or "PM".
5
{Save} i {OFF}
Note:
L When English is selected as the
display language, 12-hour clock
format is used. When French is
selected, 24-hour clock format is
used.
L If you make a mistake when entering
the date and time, press {<}, {>},
{^}, or {V} to move the cursor, then
make the correction.
L The date and time may be incorrect
after a power failure. In this case, set
the date and time again.