Advertisement
Quick Links
Advertisement
Related Manuals for Bosch DCN Wireless 2.32
Summary of Contents for Bosch DCN Wireless 2.32
- Page 1 DCN Wireless 2.32 Release Notes en Release Notes...
-
Page 3: Table Of Contents
DCN Wireless 2.32 Release Notes en | 3 Table of contents Introduction ..........4 Release 2.32 ..........5 Release 2.31 ..........8 Release 2.30 ..........10 History............13 Bosch Communications Systems... -
Page 4: Introduction
DCN Wireless 2.32 Release Notes en | 4 1 Introduction This document contains information, which was not available during the creation of the manuals. Please read all manuals. Bosch Communications Systems... -
Page 5: Release 2.32
2.2.4 DCN-WAP It’s not possible to upgrade a DCN-WAP HW- version <1.20 with the Download & License Tool version 2.32. To solve this, contact the Bosch Service Channel and ask to exchange your DCN- 2.1 General WAP for a DCN-WAP with HW-version ≥ 1.20. - Page 6 DCN Wireless 2.32 Release Notes en | 6 2.5.2 Open the pre-defined slide in the Microsoft In case ‘enabled’ is selected, while no DCN Next PowerPoint presentation failed' If the languages of Microsoft Windows and Generation or DCN wireless system is connected, PowerPoint are not the same, the predefined slide the transmitter will show the fault status “Network...
- Page 7 DCN Wireless 2.32 Release Notes en | 7 network will be upgraded. In case the DCN-WAP is connected, it will take more than 30 minutes to upgrade the DCN-WAP. Bypass: In case the DCN-WAP does not need to be upgraded, do not connect the DCN-WAP when selecting “Down Load Optical”.
-
Page 8: Release 2.31
DCN Wireless 2.32 Release Notes en | 8 3 Release 2.31 3.3 Errata 3.3.1 Integrus manual: added menu 4B Network mode 3.1 General Menu 4B (Network mode) has been added. Options: • Automatic – use this when the transmitter is not 3.1.1 Release... - Page 9 DCN Wireless 2.32 Release Notes en | 9 Network\Download and License Tool “ is (refer to chapter 12.4.1 of the Installation & User the part "Program Files" in English. Manual). • In case chairman priority is set to ‘Temporarily Off’...
-
Page 10: Release 2.30
If required, these false Bad Signal warnings can be suppressed by uploading a patch software version that will be available soon. Contact the Bosch National Sales Organization for more information. Bosch Communications Systems... - Page 11 DCN Wireless 2.32 Release Notes en | 11 4.5.2 Microphone will be reset to default after a 4.5.7 Text “starting” remains on WCCU de-init. In a system with an Audio Expander and an When a de-init wired is activated at the WCCU the Integrus transmitter, the text “starting”...
- Page 12 DCN Wireless 2.32 Release Notes en | 12 Bosch Communications Systems...
-
Page 13: History
DCN Wireless 2.32 Release Notes en | 13 5 History Release Release Release Comments Date 2.32 2007-07-24 Update for new release DCN-W. Main improvement; see 3.6.6. • 2.31 2007-06-14 Updated firmware version numbers of optical units: have the same firmware •... - Page 14 For more information please visit © 2007 Bosch Security Systems B.V. Data subject to change without notice September 2007...