(Clp-880/860/840); Adjusting Effect Depth; Brilliance (Clp-880/860/840) - Yamaha Clavinova CLP-880 Owner's Manual

IJ IJ
I
JJJ
The Effect
(CLP-880/860/840)
The [EFFECT] button allows you to select one of the effects that can give
your sound greater depth and animation.
I
I
To select an effect type press the [EFFECT] button a few times
::itHORUS
until the indicator corresponding to the desired type lights (the indica­
GSVMPHONIC
o
TREMOLO
tors light in sequence each time the [EFFECT] button is pressed). No
o
DELAY
effect is produced when all indicators are off.
OFF
No effect is selected when no EFFECT indicator is lit.
CHORUS
Shimmering, broadening effect
SYMPHONIC
Adds a deep, symphonic backdrop
TREMOLO
Tremolo effect
DELAY
Echo effect
rEm
NOTE) •
The default effect type (including OFF) and depth settings are different for
each voice.
6JJ
Adjusting Effect Depth .....................................................:.......................
Effect depth can be individually adjusted for the selected voice by
using the [-/NO] and [+/YES] buttons while holding the [EFFECT]
button. The depth range is from 0 through 20 (the current depth setting
appears on the LED display while the [EFFECT] button is held). A
setting of "0" produces no effect, while a setting of "20" produces
maximum effect depth. Press the [-IN 0] and [+/YES] buttons simulta­
neously while holding the [EFFECT] button to recall the default
setting for the current voice (the default depth settings are different for
each voice).
Brilliance
(CLP-880/860 /840)
I
This control can be used to change the tonality or "timbre" of the sound
output. The control range is from MELLOW to BRIGHT.
IJ
IJ
I
JJJ
For a brighter or "sharper" tone, slide the control towards the
BRIGHT position. For a "rounder" more mellow tone, slide the control
towards the MELLOW position.
I