Reverb; Adjusting Reverb Depth - Yamaha Clavinova CLP-880 Owner's Manual

IJ IJ
I
Reverb
JJJ
The [REVERB] button selects a number of digital reverb effects that you can
use for extra depth and expressive power.
I
I
)~
o
HALL 1
o
HALL 2
o
STAGE
To select a reverb type press the [REVERB] button a few times
until the indicator corresponding to the desired type lights (the indica­
tors light in sequence each time the [REVERB] button is pressed). No
reverb is produced when all indicators are off.
OFF
No reverb effect is selected when no REVERB indicator is lit. .
ROOM
This setting add a continuous reverb effect to the sound that is similar
to the type of acoustic reverberation you would hear in a room.
HALL
1
For a "bigger" reverb sound, use the HALL 1 setting. This effect
simulates the natural reverberation of a small-size concert hall.
HALL 2
For a really spacious reverb sound, use the HALL 2 setting. This effect
simulates the natural reverberation of a large concert hall.
STAGE
A simulation of the type of reverb produced in a stage environment.
CE
NOTE
1 •
The default reverb type (including OFF) and depth settings are different
for each voice.
o
Adjusting Reverb Depth .........................................................................
Adjust the reverb depth for the selected voice by using the [-/NO]
and [+iYES] buttons while holding the [REVERB] button. The depth
range is from 0 through 20 (the current depth setting appears on the
LED display while the [REVERB] button is held). A setting of "0"
produces no effect, while a setting of "20" produces maximum reverb
depth. Press the [-/NO] and [+/YES] buttons simultaneously while
holding the [REVERB] button to recall the default setting for the
current voice (default depth settings are different for each voice).