Getting Started; M7Cl Network Setup; Ipad Wi-Fi Settings - Yamaha M7CL StageMix V3.0 User Manual

Yamaha Commercial Audio

3.0 Getting Started

3.1

M7CL Network Setup

I. Connect the Wi-Fi access point to the M7CL console's network port via a
CAT5 cable. Note that a cross-over cable will be needed with older access
points that don't have the "auto MDIX" function. Most recent devices will
support "auto MDIX", in which case a straight CAT5 cable can be used.
II. Note the IP address and MAC address of the M7CL console - they will need to
be entered into the iPad later. They can be found in the console as follows:
a. Press the [SETUP] button on the M7CL touchscreen
b. Press [NETWORK] on the M7CL touchscreen
3.2

iPad Wi-Fi Settings

The iPad needs to be given a static IP address in the same range as the
M7CL's IP Address.
a. Open the iPad "Settings" menu
b. Select "Wi-Fi", and choose the correct network
c. Press the blue circle with the white arrow to the right of the selected
network to edit the IP address.
d. Select [Static].
M7CL StageMix V3.0 User Guide
Page 5