Eq & Pan; Eq Curve In Mixer Window - Yamaha M7CL StageMix V3.0 User Manual

Yamaha Commercial Audio
5.0 EQ & PAN
The thumbnail area at the top of each channel strip displays an EQ curve or
the Pan position for that channel.
The buttons to the left of the thumbnails are used to select between EQ and
PAN mode by tapping on the left or right cursor button.
5.1 EQ
Every channel in the M7CL console has a dedicated Parametric EQ (PEQ).
M7CL consoles also have Graphic EQs (GEQs) that can be assigned
(inserted) on input or output channels.
Note: assignment of GEQs to channels must be done on the console and
cannot be done in StageMix.

5.1.1 EQ Curve in Mixer Window

The EQ curve section on the Mixer Window will show the user whether a GEQ
is available on any channel. If a GEQ is available on a channel in addition to
PEQ, the user will be able to view the curve for either of these EQs and
access the editing screen for either type of EQ.
Green and blue dots below each EQ curve indicate the types of EQ available
on that channel, and the type of EQ (PEQ or GEQ) that is currently displayed
for that channel. A green dot indicates PEQ and a blue dot indicates GEQ.
When only PEQ is currently available on a channel, no dots will appear below
the curve. (In Demo mode, GEQs appear on Mix busses1, 7, 8 and Mono).
In the example above:
 Mix Bus 1 has both PEQ and GEQ available, and GEQ is currently being
displayed (the blue dot is solid and the curve is blue).
 Mix Bus 2 has both PEQ and GEQ available, and PEQ is currently being
displayed (the green dot is solid and the curve is green).
M7CL StageMix V3.0 User Guide
Page 16