Last Memory; Aging - Pioneer PDP-61MXE1 Technical Manual

4.1.3 Last Memory

Approximately 1 second after changing a setting, it is read into EEPROM.
If the power is cut off during setting, the setting is not entered in memory.
Note
In the case of a permanent installation, when the entire system is started or stopped by turning ON/OFF the breaker, use
the system only after first saving adjustments and settings in the last memory according to the timing described above.
Also, with this operating method, errors may occur in the count of the hour meter.

4.1.4 Aging

After the power is turned ON, a white 100% signal, or a signal such as a DVD movie that prevents burning is input and
aging is performed until it is stable (about 30 seconds). When adjustments are made after aging is performed, it possible to
perform more precise adjustment.
Note
When a still screen is displayed for a long time, there is possibility that the screen could be burned.
Before Beginning Adjustments
39