Dubbing; Dubbing To A Vcr - JVC GR-DVL505 Instructions Manual

46
EN
Connector cover**
To S
Core filter
S-Video cable
(optional)
To
S-VIDEO IN
* Connect when an S-Video cable is not used.
** When connecting the cables, open this cover.
Power Switch
To AV
Core filter
Audio/Video
cable
(provided)
White to
AUDIO L IN
Yellow to Red to
VIDEO IN AUDIO R
IN
VCR
TV

Dubbing To A VCR

1
Following the illustration, connect the camcorder and
the VCR. Also refer to pg. 42 and 43.
2
Set the VIDEO/DSC Switch to "VIDEO", then set the
camcorder's Power Switch to "
down the Lock Button located on the switch, turn on
the VCR's power, and insert the appropriate cassettes
in the camcorder and the VCR.
3
Engage the VCR's AUX and Record-Pause modes.
4
Engage the camcorder's Play mode to find a spot just
before the edit-in point. Once it is reached, press
4/6 on the camcorder.
5
Press 4/6 on the camcorder and engage the VCR's
Record mode.
6
Engage the VCR's Record-Pause mode and press
4/6 on the camcorder.
7
Repeat steps 4 through 6 for additional editing, then
stop the VCR and camcorder when finished.
NOTES:
Use the provided Audio/Video cable, making sure to
connect the end with a core filter to the camcorder. The
core filter reduces interference.
The S-Video cable is optional. Be sure to use the
YTU94146A S-Video cable.
Consult the JVC Service Center described on the sheet
included in the package for details on its availability.
Make sure to connect the end with a core filter to the
camcorder. The core filter reduces interference.
You can use Playback Zoom (
Special Effects ( pg. 53) in step 5.
Before you start dubbing, make sure that the indications
do not appear on the connected TV. If they do, they are
being recorded onto the new tape.
To choose whether or not the following displays appear
on the connected TV . . .
•Date/Time
.... set "DATE/TIME" to "ON" or "OFF" in the Menu
Screen ( pg. 34).
•Time Code
.... set "TIME CODE" to "ON" or "OFF" in the Menu
Screen ( pg. 34).
•Playback Sound Mode, Tape Speed And Tape Running
Displays
.... set "ON SCREEN" to "LCD" or "SIMPLE" in the
Menu Screen (
remote control.

DUBBING

" while pressing
pg. 52) or Playback
pg. 34). Or, press DISPLAY on the