Panasonic KX-TDE100 Installation Manual page 162
Pure ip-pbx
Hide thumbs
Also See for KX-TDE100:
- Programming manual (1018 pages) ,
- Pc programming manual (982 pages) ,
- Features manual (470 pages)
Table of Contents
Advertisement
5.1.3 Operation
PROBLEM
•
During a power failure,
extensions connected
to ports 1 to 4 of
MSLC16/CSLC16/
SLC16 and ports 1 to 2
of DHLC8/SLC8/
MCSLC16/MCSLC24
cards do not operate.
•
Originating an outside
call, call transfer, or
conference cannot be
performed.
•
The KX-HGT100 does
not work properly, or
some features cannot
be performed using the
KX-HGT100.
162
Installation Manual
PROBABLE CAUSE
•
A DPT or APT is
connected to the
extension port.
•
The dialing mode (tone
or pulse) is incorrect.
•
The corresponding
flexible button does not
exist on the PT.
•
The firmware of the
KX-HGT100 and the
MPR software file
version of the PBX are
not upgraded to their
latest versions.
SOLUTION
•
Disconnect the DPT or APT and connect
an SLT.
•
Set the Tone/Pulse switch to the other
position.
•
Program the flexible button. Refer to
"6.1.3 Flexible Buttons" in the Feature
Manual.
•
Upgrade the firmware of the KX-HGT100
and the MPR software file version of the
PBX to their latest versions.
Document Version 2011-10
Advertisement
Table of Contents
Troubleshooting
