NETGEAR Zing Getting Started Manual page 14

Use Your Device
LED Status Indicator
The LED on the front of your Zing Mobile Hotspot
indicates the hotspot's status. See the following table:
LED Description
Your Zing Mobile Hotspot is
connected to the network, and
Blue single blink
Wi-Fi is ready.
Blue double
Data is being transferred.
blink
The network is not ready.
(Mobile broadband is
Amber blink
disconnected, no signal is
available, or Wi-Fi is asleep.)
Alternating
Software updates are being
orange and
applied.
amber blink
14
Tools & Resources
• User Guide – View the comprehensive
User Guide online at sprint.com/support.
Updates – Your Zing Mobile Hotspot™ must be
•
activated prior to receiving updates. Once
activated, your device's home screen will display
an alert notifying you if updates are available.
You can access updates from either your device
or your Sprint Hotspot Zing Manager.
• From your Zing Mobile Hotspot, touch
Settings > More > About
Updates, then touch Check for Updates now.
• From your Sprint Hotspot Zing Manager, click
Settings > General > Software and Reset,
then click Check for update.
Device Help – From the Zing Manager home
•
page on your computer, click Support, then
click User Guide.
Software
>