Indication Lamp; Nylon Cutting Head - Makita BBC300L Instruction Manual

Battery/motor protection system
The battery cartridge and machine are equipped with
protection systems, which automatically reduces or cuts
off the output power for their long service life.
Under overloaded situation, the protector drops the
revolution to protect the motor. In this case, the following
two indication lamps do not light up or blink.
The other functions can be recognized by two indication
lamps as follows when working.
- Blinking
- Lighting On
Blinking
Lighting On
Blinking Blinking
010823

Nylon cutting head

CAUTION:
Do not bump the head when it rotates greater than
•
4,500 /min or it is stopped.
1
010770
The nylon cutting head is a dual string trimmer head with
bump & feed mechanisms.
Bump the nylon cutting head against the ground to feed
out extra cord during driving the equipment. The cord
will be automatically cut to the appropriate length by the
cutter on the guard extension.
Status
Battery power has been
nearly used up.
Battery protector is
shutting off the power -
battery power has been
used up.
Overload protector is shutting
- off the power - the motor was
locked.
Overheat protector is shutting
-
off the power - overheating.
Electric or electronic
malfunction
1. Most effective
cutting area
1
010765
Action to be taken
Replace the battery with fully charged one.
Replace the battery with fully charged one.
Release the switch trigger and remove the
cause of the motor lock or overload. If the
cutting tool is locked by entangling weeds or
the like, always remove the battery cartridge
before clearing it.
Rest the equipment for a while.
Ask your local authorized service center for
repairs.
NOTE:
If the nylon cord does not feed out with bump,
rewind/replace the
procedures described under "Maintenance."
ASSEMBLY
CAUTION:
Always be sure that the equipment is switched off
•
and the battery cartridge is removed before
carrying out any work on the equipment.
Start the equipment only after having assembled it
•
completely.
8

1. Indication lamp

nylon cord by following the