Advertisement
8.
Remove the navigation unit from the left and the
right vehicle brackets (four screws).
SCREW (Reuse.)
LEFT VEHICLE
BRACKET
(Retain.)
Installing the Player
9.
Using the four 5 x 8 mm washer-screws supplied
with the player and the four screws removed in
step 8, install the player and the navigation unit to
the left and the right player brackets.
5 x 8 mm WASHER
SCREW (supplied
with the player)
LEFT
PLAYER
BRACKET
SCREWS
(reused)
Secure at the lower
end of the hole.
© 2005 American Honda Motor Co., Inc. - All Rights Reserved.
NAVIGATION UNIT
SCREW (Reuse.)
RIGHT VEHICLE
BRACKET
(Retain.)
2703060T
NAVIGATION
5 x 8 mm WASHER
UNIT
SCREW (supplied
with the player)
PLAYER
RIGHT
PLAYER
BRACKET
SCREWS
(reused)
2703140T
10. Unplug the vehicle connectors, and plug in the
2-port bus cable connector into the vehicle
connectors.
EPT SEALERS (2)
CONNECTORS (4)
POCKET
OPENING
VEHICLE
CONNECTOR
2-PORT
BUS CABLE
CONNECTOR
11. Wrap the plugged connectors with the EPT
sealers.
12. Plug the bus cable into the 2-port bus cable
connector.
2-PORT
BUS
CABLE
WIRE TIE
VEHICLE
HARNESS
2-PORT
BUS CABLE
CONNECTOR
13. Secure the 2-port bus cable to the vehicle harness
with one wire tie.
14. Wrap the plugged connectors with one EPT sealer.
AII 31211 (0510)
2-PORT BUS CABLE
CONNECTOR
EPT SEALER
POCKET OPENING
BUS CABLE
CONNECTOR
4419090Y
BUS
CABLE
4419130Y
5 of 9
Advertisement
