Figure 42: Ap Profile - Radio Configuration (Part-1) - D-Link DWC-1000 User Manual

Wireless Controller

Figure 42: AP Profile - Radio configuration (Part-1)

Transmit Lifetime: Shows the number of milliseconds to wait before
terminating attempts to transmit the MSDU after the initial transmission.
Rate Limit: Enter the rate limit you want to set for multicast and broadcast
traffic. The limit should be greater than 1, but less than 50 packe ts per second.
Any traffic that falls below this rate limit will always conform to and be
transmitted to the appropriate destination. The default and maximum rate limit
setting is 50 packets per second. This field is disabled if Rate Limiting is
disabled.
78
User Manual