Dispenser Trim - GE Side by Side Refrigerators Installation Instructions Manual

DISPENSER TRIM FIT EXAMPLES:
(NOT TO SCALE)
3/4" OVERLAY PANEL
(Flush Installation Only)
• The dispenser trim fits over the
custom panel and snaps into the
freezer door.
1/4" FRAMED PANEL
(Standard Installation
Only)
• The dispenser trim fits over the
custom panel and snaps into the
freezer door.
• The clips will not engage the door
if the panel is more than 0.250" thick.
• If the panel is less than 0.250" thick,
a noticeable gap may be created
around the dispenser trim.
3/4" OVERLAY PANEL
(Standard Installation
Only)
• The dispenser trim fits over the
custom panel and snaps into the
freezer door.
• The clips will not engage the door
if the panel is more than 1.100" thick.
• If the panel is less than 1.100" thick,
a noticeable gap may be created
around the dispenser trim.
Design Guide
12