Rj-45 1000Base-T Gbic Connector Pinouts; Table B-7 Rj-45 1000Base-T Gbic Connector Pinouts - Cisco 11500 Series Hardware Installation Manual

RJ-45 1000BASE-T GBIC Connector Pinouts

RJ-45 1000BASE-T GBIC Connector Pinouts
Cisco 11500 Series Content Services Switch Hardware Installation Guide
B-8
Table B-7 lists the RJ-45 1000BASE-T GBIC connector pinouts.
Table B-7 RJ-45 1000BASE-T GBIC Connector Pinouts
Signal Name
TP0 +
TP0 -
TP1+
TP2+
TP2-
TP1-
TP3+
TP3-
The 1000BASE-T SFP GBIC on a CSS supports 1000 Mbps full-duplex operation
only and uses standard four twisted-pair, Category 5e cable at lengths up to
328.08 ft. (100 m).
Figure B-1 and Figure B-2
straight-through and crossover cables for the 1000BASE-T GBIC module port.
When connecting the CSS to servers, workstations, and routers, use the
straight-through cable. When connecting the CSS to switches and repeaters, use
the crossover cable.
Appendix B
Pin Number
1
2
3
4
5
6
7
8
show the schematics of four twisted-pair
Cable Connector Pinouts
78-17231-01