Replacement Of Consumable Items - Fujitsu 1PRIMERGY RX600 S4 User Manual

Chapter 8 Operation and Maintenance

8.1.3 Replacement of Consumable Items

Consumable items are required to be replaced to maintain their performance and function. Users are
responsible for procurement and replacement of consumable item shown below. For procurement,
contact an office listed in the "Contact Information" of "Start Guide".
Consumable items
This server contains the consumable items listed below. For details on how to replace a battery backup
unit of the SAS array controller card (standard), refer to "
(standard)" ( pg.184).
Consumable item
Battery Backup Unit
How to replace a battery backup unit (standard)
This section describes how to replace a battery backup unit of the SAS array controller card installed as
a standard feature.
184
table: Consumable items
Product ID Objective product
PG-BBU3 SAS array controller card
(standard)
PG-BBU2 SAS array controller card
(PG-244C)
PG-BBU5 SAS array controller card
(PG-248G1)
• Before installing/removing a battery backup unit, turn off the server, all
peripheral devices, and any other connected devices. Also unplug all power
cables from the outlet. Failure to do so can cause electric shock.
• Devices inside the server remain hot after shutdown. Wait for approximately
10 minutes after shutdown before installing or removing internal options.
• The exposed parts of circuit boards and soldered parts can be damaged by
static electricity.
Before handling them, first touch a metal part of the server to discharge static
electricity.
• Do not touch the circuitry on boards and soldered parts. Hold the metallic
areas or the edge of the circuit boards.
How to replace a battery backup unit
Description
The Battery Backup Unit is required to be
replaced within 3 years from procurement of
the server or the previous replacement
regardless of the accumulated time period of
use.