D-Link DGE-528T Manual page 18

Assigning a Static IP Address continued
Highlight Internet Protocol (TCP/IP)
Click Properties
Select Use the following IP Address in the Internet
Protocol (TCP/IP) Properties window
Input your IP Address and subnet mask. (The IP
Addresses on your network must be within the same
range. For example, if one computer has an IP Ad
dress of 192.168.0.2, the other computers should have
IP Addresses that are sequential, like 192.168.0.3 and
192.168.0.4. The subnet mask must be the same for
all the computers on the network.)
Input your DNS server address. (Note: If you are
entering a DNS server, you must enter the IP Address
of the Default Gateway.)
The DNS server information will be provided by your
ISP (Internet Service Provider.)
Click OK
You have completed the assignment of a Static IP Address. (You do not need to assign a Static IP
Address if you have a DHCP-capable Gateway/Router.)
Other networking tasks
For help with other tasks in home or small office networking, see Using the Shared Documents
folder and Sharing files and folders in the Help and Support Center in Microsoft Windows XP.
18