Download Print this page
D-Link AirPlus DWL-G510 Quick Installation Manual

D-Link AirPlus DWL-G510 Quick Installation Manual

Wireless pci adapter
Hide thumbs Also See for AirPlus DWL-G510:

Advertisement

Available languages

Available languages

  • ENGLISH, page 1

Quick Links

This product works with the following operating
Windows XP, Windows
system software:
2000, Windows Me, Windows 98SE
Before You Begin
You must have at least the following:
A desktop computer with an available 32-bit PCI slot
At least a 300 MHz processor and 32MB of memory
An 802.11g or 802.11b Access Point (for Infrastructure Mode) or another
802.11g or 802.11b wireless adapter (for Ad-Hoc; Peer-to-Peer networking
mode.)
Check Your Package Contents
These are the items included with your DWL-G510 purchase:
If any of the above items are missing, please contact your reseller.
Insert the D-Link CD-ROM Into Your
Computer
Turn on the computer
Insert
the D- Link AirPlus
Driver CD in the CD-ROM drive.
The step-by-step instructions that follow are shown
in Windows XP. The steps and screens are similar
for the other Windows operating systems
©2005 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders.
DWL-G510 AirPlus
CD-ROM (containing Drivers, Manual and Warranty)
and
®
G DWL-G510
Software and specifications subject to change without notice.
®
G Wireless PCI Adapter
Wireless PCI Adapter
into your computer
before installing the
driver software from
the D-Link CD!
1
DWL-G510
AirPlus
Wireless PCI Adapter
Do
NOT
install
the DWL-G510
®
G

Advertisement

loading

Summary of Contents for D-Link AirPlus DWL-G510

  • Page 1 Windows XP. The steps and screens are similar driver software from for the other Windows operating systems the D-Link CD! ©2005 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice.
  • Page 2 Continued... If the CD Autorun function does not automatically start on your computer, type “D:\Drivers\setup.exe.” If it does start, proceed to the next screen. Click Install Driver Click Next Click Next Click Next...
  • Page 3 Continued... Click Finish Shut down your computer Remember to leave the DWL-G510 Driver CD in the CD-ROM drive. Installing the DWL-G510 Wireless PCI Adapter in Your Computer Make sure to turn off your computer and unplug the power cord. Remove the back cover of the computer. Install the DWL-G510 carefully and firmly seat it into an available PCI slot (which is usually “white”...
  • Page 4: Restart Your Computer

    Antenna 32-bit connector Screw Mount Used to wirelessly This is the connector that The screw to secure connect to WiFi fits into the PCI slot on your the PCI Adapter to networks. computer’s motherboard the back of your computer will fit in this slot Back Panel Shield Once properly installed,...
  • Page 5 Your Installation is Complete! ® After you’ve continued in Windows 2000, ME, or 98SE, the D-Link AirPlus DWL-G510 Configuration Utility will automatically start and the utility icon will appear in the bottom right hand corner of the desktop screen (systray). If this...
  • Page 6 Appendix For Windows XP, if you wish to use the AirPlus G utility, please do the following steps. Click the XP Networking icon to use the Zero Configuration Wireless Settings. Click Advanced Uncheck “Use Windows to configure my wireless network settings. Click...
  • Page 7 Appendix (Cont.) Using the Configuration Utility SSID The Service Status: Displays Frequency: Displays the Set Identifier is the name the MAC Address of current frequency used by assigned to the wireless the Access Point that the current connection to the network.
  • Page 8 Appendix (Cont.) SSID: The Service Set Identifier is the name assigned to the wireless network. The factory SSID setting is set to default. Make changes here to match the SSID on existing Wireless Router or Access Point. Data Encryption: The default setting is Wireless Mode: The factory setting set to Disable.
  • Page 9: Ip Address Configuration

    IP Address Configuration To connect to a network, make sure the proper network settings are configured for DWL-G510. Microsoft Windows XP: Go to Start > right click on My Network Places > select Properties > Double- click on the Network Connection associated with the DWL-G510.
  • Page 10 For Windows 2000 users: Go to Start > Settings > Network and Dial-up Connections > Double-click on Local Area Connection associated with the DWL-G510 > select Properties Click Internet Protocol (TCP/IP) Click Properties Dynamic IP Address setup Used when a DHCP server is available on the local network.
  • Page 11 MEMO...
  • Page 12: Technical Support

    Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers within Australia: D-Link Technical Support over the Telephone: 1300-766-868 Monday to Friday 8:00am to 8:00pm EST Saturday 9:00am to 1:00pm EST D-Link Technical Support over the Internet: http://www.dlink.com.au...
  • Page 13 You can find software updates and user documentation on the D-Link website. Tech Support for customers within South Eastern Asia and Korea: D-Link South Eastern Asia and Korea Technical Support over the Telephone: +65-6895-5355 Monday to Friday 9:00am to 12:30pm, 2:00pm-6:00pm...
  • Page 14 Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers within India D-Link Technical Support over the Telephone: +91-22-26526741 +91-22-26526696 –ext 161 to 167 Monday to Friday 9:30am to 7:00pm D-Link Technical Support over the Internet: http://ww.dlink.co.in...
  • Page 15 Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers for the duration of the warranty period on this product. Customers can contact D-Link technical support through our web site or by phone.
  • Page 16 Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers within the U.A.E & North Africa: D-Link Technical Support over the Telephone: (971) 4-391-6480 (U.A.E) Sunday to Wednesday 9:00am to 6:00pm GMT+4 Thursday 9:00am to 1:00pm GMT+4 D-Link Middle East &...
  • Page 17 You can find software updates and user documentation on the D-Link website. Tech Support for customers within South Africa and Sub Sahara Region: D-Link South Africa and Sub Sahara Technical Support over the Telephone: +27-12-665-2165 08600 DLINK ( For South Africa only )
  • Page 18 Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for Latin America customers: D-Link Technical Support over the followings Telephones: Argentina: 0800-666 1442 Monday to Friday 09:00am to 22:00pm Chile: 800-214 422 Monday to Friday 08:00am to 21:00pm...
  • Page 19: Прежде Чем Начать

    установили драйвера с Пошаговая инструкция приведена для компакт-диска D-Link! Windows XP. В других версиях Windows могут быть некоторые отличия. ©2005 D-Link Systems, Inc. Все права зарегистрированы. Торговые марки являются собственностью их владельцев. Программное обеспечение и спецификация продукта могут быть изменены без предупреждения.
  • Page 20 Продолжение… Если компакт-диск не запустился автоматически, наберите “D:\Drivers\ setup.exe” в строке «Выполнить». Если же компакт-диск запустился, перейдите к следующему пункту. Щелкните Install Driver Щелкните Next Щелкните Next Щелкните Next...
  • Page 21 Продолжение… Щелкните Finish Выключите ваш компьютер Не забудьте оставить диск с драйверами DWL-G510 в приводе CD-ROM. Установка PCI адаптера DWL-G510 в ваш компьютер Убедитесь, что компьютер выключен и шнур питания отключен. Снимите заднюю крышку корпуса компьютера. Аккуратно вставьте DWL-G510 в слот PCI вашего компьютера (слот обычно...
  • Page 22 Антенна 32-битный коннектор Шуруп Используется Коннектор вставляется Шуруп для крепления для соединения в слот PCI материнской адаптера PCI на с беспроводной платы вашего компьютера. задней стенке сетью WiFi. корпуса компьютера, устанавливается в этот разъем Задняя панель При правильной установке данная панель будет Индикатор...
  • Page 23 Установка окончена! После того, как вы продолжите работу с Windows 2000, ME, или 98SE ® программа настройки D-Link D-Link AirPlus G DWL-G510 запустится автоматически и в правом нижнем углу Панели задач появится значок программы. Если значок ЗЕЛЕНЫЙ, значит вы успешно...
  • Page 24 Приложение Для Windows XP, если вы хотите использовать утилиту AirPlus G , выполните следующие действия. Кликните на значке Сетевое окружение для использования настроек Zero Configuration Wireless Щелкните Advanced Снимете выделение с пункта “Use Windows to configure my wireless network settings.” Щелкните...
  • Page 25 Приложение(Продолжение) Использование программы настройки Frequency: Status: Показывает SSID Идентификатор MAC адрес точки Показывает текущую сети - это имя, присвоенное доступа, к которой частоту, используемую беспроводной сети. Заводские подключен DWL-G510 адаптером. установки SSID - default. Wireless Mode: Режим работы беспроводного адаптера. По умолчанию – режим инфраструктуры...
  • Page 26 SSID: Идентификатор сети - это имя, присвоенное беспроводной сети. Заводские установки SSID - default. Измените SSID для соответствия точке доступа или беспроводному шлюзу. Wireless Mode: Тип сети. Настройки Data Encryption: По умолчанию по умолчанию Infrastructure. Режим устанолен в Disabled. Адаптер поддерживает...
  • Page 27 Настройка IP адреса Для подключения к сети, убедитесь, что сетевые настройки для DWL-G510 правильные. Microsoft Windows XP: Для Нажмите кнопку Start > щелкните правой кнопкой на пункте My Network Places >выберете Properties >дважды щелкните на Network Connection связанном с DWL-G510. Щелкните...
  • Page 28 Для пользователей Windows 2000: Нажмите кнопку Start > Settings > Network and Dial-up Connections > дважды щелкните на Local Area Connection связанном с DWL-G510 > выберите Properties Щелкните Internet Protocol (TCP/IP) Щелкните Properties Настройка динамического IP адреса Используется когда в сети есть DHCP сервер...
  • Page 29 MEMO...
  • Page 30: Техническая Поддержка

    Техническая поддержка Обновления программного обеспечения и документация доступны на Интернет-сайте D-Link. D-Link предоставляет бесплатную поддержку для клиентов в течение гарантийного срока. Клиенты могут обратиться в группу технической поддержки D-Link по телефону или через Интернет. Техническая поддержка D-Link: (095) 744-00-99 Техническая поддержка через Интернет...
  • Page 31: Comprobar El Contenido Del Paquete

    Windows XP. Los pasos y las pantallas son D-Link. similares para otros sistemas operativos Windows. ©2004 D-Link Systems, Inc. Reservados todos los derechos. Las marcas o marcas registradas son propiedad de los respectivos titulares. El software y las especificaciones pueden ser modificados sin previo aviso.
  • Page 32 Continuación... Si la función Autorun del CD no se ejecuta automáticamente en el ordenador, debe escribirse “D:\ Drivers\setup.exe”. Si se ejecuta automáticamente, continuar con la pantalla siguiente. Hacer click en Install Driver Hacer click en Next Hacer click en Next Hacer click en Next...
  • Page 33 Continuación... Hacer click en Finish Apagar el ordenador Hacer No se debe sacar el CD DWL-G510 de la unidad de CD-ROM. Instalar el adaptador inalámbrico PCI DWL-G510 en el ordenador Asegurarse de que el ordenador está apagado y que el cable eléctrico está desenchufado.
  • Page 34 Tornillo de fijación Conector 32-bit Antena El tornillo para fijar Se usa para Éste es el conector que el adaptador PCI a conexiones encaja en el slot PCI de la la parte trasera del inalámbricas a placa madre del ordenador. ordenador ha de redes WiFi.
  • Page 35 Si Windows 2000, ME o 98SE están en funcionamiento, la Utilidad de ® configuración del DWL-G510 AirPlus D-Link se activará automáticamente y aparecerá el icono de la utilidad en la parte inferior derecha de la pantalla del ordenador de sobremesa (systray). Si el icono aparece en VERDE, el DWL-G510 se ha instalado correctamente, se está...
  • Page 36 Apéndice Si se quiere usar la utilidad AirPlus G para Windows XP, deben seguirse los pasos que se indican a continuación. Hacer click en el icono XP Networking para usar Zero Configuration Wireless Settings. Hacer click en Advanced Desmarcar “Use Windows to configure my wireless network settings.
  • Page 37 Apéndice(Continuación) Usar la utilidad de configuración Status: Muestra SSID Service Set Identifier la dirección MAC del Frequency: Muestra la es el nombre asignado a la red punto de acceso que frecuencia utilizada por el inalámbrica. La configuración de está asociado con el adaptador.
  • Page 38 SSID: Service Set Identifier es el nombre asignado a la red inalámbrica. La configuración de fábrica del SSID es default. Se puede modificar para adaptar el SSID a un enrutador o a un punto de acceso inalámbricos. Wireless Mode: La configuración de Data Encryption: El parámetro por fábrica es Infrastructure.
  • Page 39 Configuración de la dirección IP Para conectarse a una red, es necesario asegurarse de que se han configurado los parámetros adecuados de red para el DWL-G510. Para Microsoft Windows XP: Ir a Start > hacer click con el botón de la derecha My Network Places >...
  • Page 40 Para usuarios de Windows 2000: Ir a Start > Settings > Network and Dial-up Connections > hacer doble click en Local Area Connection asociada con el DWL-G510 > seleccionar Properties. Hacer click en Internet Protocol (TCP/IP) Hacer click en Properties Configuración de la dirección IP dinámica Se usa cuando hay un...
  • Page 41 MEMO...
  • Page 42: Asistencia Técnica

    El servicio de soporte técnico tiene presencia en numerosos países de la Región Latino América, y presta asistencia gratuita a todos los clientes de D-Link, en forma telefónica e internet, a través de la casilla soporte@dlinkla.com Soporte Técnico Help Desk Argentina: Teléfono: 0800-6661442 Lunes a Viernes 09:00 am a 22:00 pm...
  • Page 43 D-Link! similares para os outros sistemas operacionais Windows. ©2005 D-Link Systems, Inc. Todos os direitos reservados. As marcas comercias ou marcas comerciais registradas são propriedade dos seus respectivos detentores. Os softwares e especificações estão sujeitos a mudanças sem prévio aviso.
  • Page 44 Continuação... Se a função Autorun do CD não for iniciada automaticamente no seu computador, digite “D:\Drivers\setup.exe” Se começar, vá para a próxima tela. Clique em Install Driver Clique em Next Clique em Next Clique em Next...
  • Page 45 Continuação... Clique em Finish Desligue o seu computador Instalando o Adptador PCI Wireless DWL-G510 no seu Computador Certifique-se de desligar o seu computador e desconectar o cabo de alimentação. Remova a tampa traseira do computador. Instale o DWL-G510 cuidadosamente e encaixe-o firmemente em um slot PCI disponível (que normalmente possui a cor “branca”...
  • Page 46 Antena Conector de 32 bits Parafuso de Fixação Utilizada para se Este é o conector que se O parafuso para fixar conectar às redes encaixa no slot PCI da placa o Adaptador PCI na WiFi sem utilizar mãe do seu computador parte traseira do seu cabos computador será...
  • Page 47 Sua Instalação está Concluída! ® Após você ter prosseguido no Windows 2000, ME, ou 98SE, o D-Link AirPlus G DWL-G510 Configuration Utility será iniciado automaticamente e o ícone do utilitário será exibido no canto inferior direito da tela de desktop (systray). Se este ícone aparece VERDE,...
  • Page 48 Anexo Para o Windows XP, se você deseja utilizar o utilitário AirPlus G, favor realizar as seguintes etapas: Clique no ícone XP Networking para utilizar Configuration Wireless Settings. Clique em Advanced Desmarque “Use Windows to configure my wireless network settings”. Clique em...
  • Page 49 Anexo (Continuação) Status: Exibe o SSID: O Service Set Indentifier (Iden- Frequency: tificador de Conjunto de Serviços) é o Endereço MAC do Exibe a freqüência nome atribuído à rede wireless. A config- Access Point que atual utilizada pelo uração SSID de fábrica é definida como está...
  • Page 50 SSID: O Service Set indentifier (Identificador de Conjunto de Serviços) é o nome atribuído à rede wireless. A configuração SSID de fábrica é definida como default. Faça mudanças aqui para coincidir o SSID no Roteador Wireless ou Access Point existente. Wireless Mode: A configuração de Data Encryption:...
  • Page 51 Configuração do Endereço IP Para se conectar a uma rede, certifique-se que as opções corretas de rede estejam configuradas para o DWL-G510. Para o Microsoft Windows XP: Vá para Iniciar My Network Places icon on the desktop > dê um duplo clique em Meus locais de rede >...
  • Page 52 Para usuários do Windows 2000: Vá para Iniciar > Configurações > Conexões de rede e dial-up > Dê um duplo clique na Conexão de área local associada com o DWL-G510 > selecione Propriedades Clique em Protocolo de Internet (TCP/IP) Clique em Properties Configuração do endereço IP dinâmico Utilizada quando um...
  • Page 53 MEMO...
  • Page 54: Suporte Técnico

    Você pode encontrar atualizações de software e documentação de usuário no site da D-Link Brasil www.dlinkbrasil.com.br. A D-Link fornece suporte técnico gratuito para clientes no Brasil durante o período de vigência da garantia deste produto. Suporte Técnico para clientes no Brasil: Telefone São Paulo (11) 2185-9301...
  • Page 55 Windows Me, Windows 98se PCI介面無線網路卡 開始之前 必須具備以下條件: • 一台具有32位元PCI插槽的桌上型電腦 • 至少300MHz的處理器和32MB的記憶體 • 一個802.11g 或802.11b基地台(用於Infrastructure模式)或其他802.11g 或 802.11b無線網路卡(用於Ad-Hoc; Peer-to-Peer聯網模式) 檢查包裝內的物品 您所購買的DWL-G510應包括以下物件 ® DWL-G510 AirPlus G 2.4GHz PCI無線網路卡 含驅動程式、使用手冊的CD-ROM 以上物件如有任何缺失請聯繫您的經銷商。 將D-Link CD-ROM置入電腦中 安裝光碟上的 打開電腦,將CD-ROM置入光碟機。 驅動程式前請勿將 DWL-G510 PCI無線介面 以下是Windows XP中的分項步驟操作指示。 網路卡裝入電腦! 這些步驟及螢幕顯示與其他Windows作業系統類似。 版權所有。D-Link與D-Link商標為友訊科技的商標,其他註冊商標分別隸屬該公司所有。最新規格以原廠通告為準, 恕不另行通知.
  • Page 56 繼續... 如電腦上不能自動啟動 CD Autorun功能,輸入 “D:\Drivers\setup.exe” 啟動後,進入下一畫面。” Install Drivers 單擊 Next 單擊 Next 單擊 Next 單擊...
  • Page 57 繼續... Finish 單擊 關 閉 電 腦 請注意,在安裝結束前不可將DWL-G510的驅動程式光碟片從CD-ROM中取出。 在電腦中安裝DWL-G510 PCI介面 無線網路卡 確認關閉電腦,拔去電源線。卸下電腦厚機箱蓋 小心地安裝DWL-G510,穩固地把它插在可用的PCI槽上 (通常是白色或淺黃色) 為了避免因人體所帶 靜 電 導 致 的 損 壞 , 在 接 觸 DWL-G510PCI無線網路卡 之前,請先觸摸一下您電腦 的金屬部分,以確保經由接 地消除了可能存在的靜電。 確認已用螺絲固定DWL-G510擴充槽檔板。 重新安裝好電腦機箱蓋。 把電腦放置到原來位置。 把DWL-G510的天線連接到後面板防護片的插孔內。...
  • Page 58 32-bit 連接器 天線 螺絲孔 把該連接器內安裝 用於無線連結網路 用螺絲穿過此處, 到電腦主機板PCI插槽內 將PCI介面卡固定在 電腦背板上。 擴充槽檔板 Link/Activity LED 如果安裝正確, 如果電腦運作良好,表示該 該擴充槽檔板應該位於 網卡安裝正確,當有資料正在 電腦的背面 傳送時,該指示燈閃爍。 重新啟動電腦 重新啟動電腦時出現 新增硬體精靈(Windows XP) 視窗。 選擇 自動安裝軟體 (建議選項) 單擊 下一步 單擊 完成 完成安裝程序。...
  • Page 59 安裝完成! ® 在Windows XP, 2000, ME或 98SE中繼續進行操作後,D-Link AirPlus DWL-G510設定應用程式(Configuration Utility)會自動啟動,桌面右下角( 工具列)出現程式圖示。如果這一圖示是綠色的,說明已成功安裝了DWL- G510,已連接無線網路,可以進行無線通訊了。 如未出現應用程式圖示, 雙擊桌面上的捷徑圖示。 雙擊應用程式圖示, 使用該程式。...
  • Page 60 附錄 對於Windows XP,如果希望使用AirPlus G工具,請按以下步驟: 單擊XP 網路圖示, 使用零組態無線設定。 單擊 進階 不檢查“使用Windows來 設定我的無線網路”。 單擊 確定...
  • Page 61 附錄(繼續) 使用設定應用程式 Status:顯示 Frequency: SSID 分配給無線網路的名 顯示 DWL-G510對應的 稱 (Service Set Identifier)。 到基地台的連接的當前 基地台的MAC位址 出廠SSID預設為default。 頻率。 Wireless Mode: 出廠設置為Infrastructure Ad-Hoc 模式用於對等連網。 Encryption: 顯示無線連接當前的加密狀態。 Packet Count: C h a n n e l : 以圖形方 TxRate: 顯 示 通 道 資 預設...
  • Page 62 附錄 使用設定應用程式(續) SSID: 分配給無線網路的名稱(Service Set Identifier)。出廠SSID預設為 default。您可在此進行修改以配合現有無線路由器或基地台上的SSID。 Data Encryption: 預設設置為 Wireless Mode: 無線模式: 出廠設 Disable。允許加密時,此網卡支援 定為Infrastructure。Ad-Hoc模式用於 WEP 和AES。 peer-to-peer 聯網方式。 Key Length: Authentication: 起用加密時,可選擇指定加密 可為無線 所使用的級別和密鑰格式。選擇適當的密鑰指 網路指定認證模式。預設設置 數: 1-4 並在相應的區輸入ACSII 或十六進位 為Open Authentication 資料。 IEEE 802.1X: 起用加密時,可選擇指定加密所使用的級別和密鑰格式。選擇 適當的密鑰等級:1-4並在相應的區域輸入ACSII或十六進位資料。...
  • Page 63 IP位址設定 要連接網路,請確認DWL-G510的 網路設置正確。 對於 Microsoft Windows XP: 到 開始 > 控制台> 網路連線,選擇 DWL-G510 的區域連線,按滑鼠右鍵選 ”內容” Internet Protocol (TCP/IP) 單擊 單擊 內容 動態IP位址設置 區域網路上有可用的DHCP伺服器 (如:路由器)時使用動態IP位址設置 選擇自動取得IP位址 (如無線路由器或基地台啟用 DHCP伺服器) 選擇 自動獲得DNS伺服器位址 單擊 確定 靜態IP位址設置 當區域網路上沒有可用的DHCP伺服器時使用 選擇 使用以下IP地址 IP 位址: 192.168.0.52 子網路遮罩: 255.255.255.0 輸入與無線路由器或基地台在...
  • Page 64 對於Windows 2000用戶: 到 開始 >設定 >控制台 >網路和撥號連線 >雙擊 DWL-G510的區域連線圖示,按下 ”內容” Internet Protocol (TCP/IP) 單擊 單擊 內容 動態IP位址設置 區域網路上有可用的DHCP伺服器 (如:路由器)時使用動態IP位址設置 選擇自動取得IP位址 (如無線路由器或基地台啟用 DHCP伺服器) 選擇 自動獲得DNS伺服器位址 單擊 確定 靜態IP位址設置 當區域網路上沒有可用的DHCP伺服器時使用 選擇 使用以下IP地址 IP 位址: 192.168.0.52 子網路遮罩: 255.255.255.0 輸入與無線路由器或基地台在 同一範圍的靜態IP地址 單擊 確定...
  • Page 65 MEMO...
  • Page 66 友冠技術支援 台灣地區用戶可以透過我們的網站,電子郵件或電話與 友冠資訊技術支援人員聯絡。 支援服務時間從 週一到週五,上午8:30 a.m. 到 7:00 p.m Web: http://www.dlinktw.com.tw/ FAQ: http://www.dlinktw.com.tw/support.asp Email: dssqa@dlinktw.com.tw Phone: 0800-002-615 如果您是台灣地區以外的用戶,請參考使用手冊 中記載的D-Link 全球各地分公司的聯絡資訊 取得支援服務。 產品維修與保固相關資訊,請參考友冠資訊網頁說明: http://www.dlinktw.com.tw/suppQuick.asp...