Cisco Catalyst Blade Switch 3130 Reference Manual page 161

Chapter 2 Cisco Catalyst Blade Switch 3130 for Dell Cisco IOS Commands
This example shows how to enable OBFL on a standalone switch and to specify that only severity 1
hardware-related messages are stored in the flash memory of the switch:
Switch(config)# hw-module module 1 logging onboard message level 1
You can verify your settings by entering the
Related Commands Command
clear logging
show logging
OL-13271-01
Description
Removes the OBFL data in the flash memory.
onboard Displays OBFL information.
Cisco Catalyst Blade Switch 3130 for Dell Command Reference
show logging onboard privileged EXEC command.
hw-module
2-133