Loading The Dishwasher Baskets - Baumatic BDW66S Instruction Manual

Special Advice
When using combination products, the rinse-aid and salt lights are no longer useful. It may be helpful
to select the lowest possible setting for water hardness.
To select "3in1" function:
1. close the door and select the 3in1 washing cycle by pressing the "3in1" button until the "3in1"
indicator blinks.
2. The 3in1 washing cycle will be available after pressing
the start/pause button , and the"3in1" indicator lights.
To cancel "3in1" function:
Follow the 'Cancelling a programme in progress' instructions.
If you decide to switch to the use of a standard detergent
system we advise that you:
1. Refill both the salt and rinse aid compartments.
2. Switch the water hardness setting to the highest possible position and run for three normal cycles
without load.
3. Readjust the water hardness setting again according to the conditions for your region (For more
information please refer to your instruction manual).

5 Loading the Dishwasher Baskets

For best performance of the dishwasher, follow these loading guidelines. Features and appearance
of baskets and Cutlery tray may vary from your model.
Attention before or after Loading the Dishwasher Baskets
1. Scrape off any large amounts of leftover food. It is not necessary to rinse the dishes under
running water. Place objects in the dishwasher in the following way:
A. Items such as cups, glasses, pots/pans, etc. are stood upside down.
B. Curve items, or those with recesses, should be at a slant so that water can run off.
C. They are stacked securely and can not tip over.
D. They do not prevent the spray arms from rotating while washing takes place.
2. Very small items should not be washed in the dishwasher as they could easily fall out of the
Baskets.
3. The upper and lower baskets can not be pull out in
the same time when the dishwasher is Loading, or it
May lead to dumping.
Removing the Dishes
To prevent water dripping from the upper basket into
the lower basket, we recommend that you empty the
Lower basket first and then the upper basket.
Loading the Upper Basket
The upper basket is designed to hold more delicate
and lighter dishware such as glasses, coffee and
tea cup and saucers, as well as plates, small
bowls and shallow pans (as long
Upper basket
as they are not too dirty). Position
Type
the dishes and cookware so that
A
they do not get moved by the
Spray of water.
B
C
8
Upper Basket
IN
Item
A A B C
Cup
14 5 12 14
Glass
A A B C
Saucer
10 2 7 1
Adjusting the Upper Basket
If required, the height of the upper basket can be adjusted in order to create more space for large
utensils either in the upper basket or lower basket. The upper basket can be adjusted for height by
putting wheels of different height into the rails. Long items, serving cutlery, salad servers or knives
should be placed on the shelf so that they do not obstruct the rotation of the spray arms. The shelf
can be folded back or removed when not be required for use.
Loading the Lower Basket
We recommend that you place large items which are most difficult to clean in to the lower basket:
pots, pans, lids, serving dishes and bowls, as shown in the figure below.
It is preferable to place serving dishes and lids on the side of the baskets in order to avoid blocking
the rotation of the top spray arm.
Pots, serving bowls, etc. must always be placed top down.
Deep pots should be slanted to allow water to flow out.
The bottom basket features fold down tine rows so that larger or more pots and pans can be loaded.
Lower basket
Folding racks
Folding racks consisting of two parts that
are located on the lower basket of your
machine are designed in order to let you
place big items easier as pots, pans, etc.
If requested, each part can be folded
separately, or all of them can be folded
and larger can be obtained. You can use
B
6
folding racks by rasing then upwards, or
by folding.
B
1
For optional
4
Lower Basket
Lower basket
Type
G
H
I
1
2
Item
Soup plate
Dinner plate
Dessert plate
9