Table of Contents
Advertisement
o While in use, the core probe must be inserted into the food to be
chilled or frozen before the cycle begins.
o To guarantee that the probe works correctly in the blast chiller
and deep-freeze cycle, insert it as in the diagram below. Insert
the tip right into the centre of the food, being careful that it does
not come out of the other side.
o At the end of the cycle, clean the probe with a soft cloth and
warm water.
REMEMBER: The blast chiller and deep-freezing periods vary a
great deal depending on the physical characteristics and the
size of the food being used. For best use, it is advisable to put
foods into the appliance with a thickness of less than 2 cm,
which are defined as STANDARD foods.
For foods in basins which are thicker than 2 cm or for foods
which are not in bowls but are thicker than 2 cm (NON-
STANDARD foods), it is advisable to choose a -18°C non-
standard foods chiller cycle.
10
Advertisement
Table of Contents
