Replacing The Memory Modules - Dell Latitude C400 Service Manual

Notebook

Hide thumbs Also See for Latitude C400:

Table of Contents

Memory Module and Modem Daughter Card : Dell Latitude C400 Service Manual

Replacing the Memory Modules

NOTE:

Memory modules are keyed, or designed to fit into their sockets, in only

one direction.

NOTICE:

The memory module must be inserted at a 45-degree angle to avoid

damaging the connector.

1. Align the notch in the memory module with the slot in the center of the socket.

2. Slide the edge connector of the module firmly into the socket at a 45- degree

angle, and rotate the module down until you hear a click. If you do not hear the

click, remove the module and reinstall it.

3. Replace the cover and tighten the two captive screws.

Removing the Modem Daughter Card

NOTICE:

Disconnect the computer and any attached devices from electrical

outlets, and remove the battery.

NOTICE:

To avoid ESD, ground yourself by using a wrist grounding strap or by

touching an unpainted metal surface on the computer.

NOTICE:

Read

following procedure.

1. Turn the computer over, and remove the

2. Remove the M2 x 4-mm screw that secures the modem daughter card to the

system board.

file:///F|/Service%20Manuals/Dell/Latitude/c400/upgrades.htm (4 of 6) [2/28/2004 7:51:00 AM]

"Preparing to Work Inside the

Computer" before performing the

memory module/modem

cover.

Table of Contents