6 Command Line Interface
show ipif [<ipif_name>]
show switch
config account admin password
<passwd>
save
debug info
Each command is listed in detail, as follows:
?
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display a list of commands of the switch:
DGS-1500-28> ?
USEREXEC commands :
config account admin password <passwd>
config ipif <ipif_name> { ipaddress <ip-address> <subnet-mask> gateway <gw-
address> | dhcp | bootp }
config ipif <ipif_name> { ipv6 ipv6address <ipv6networkaddr> | dhcpv6_client {
enable | disable}}
debug info
download
<path_filename>
logout
ping <ip_addr>
ping6 <ipv6addr>
reboot
reset config
save
show ipif [<ipif_name>]
show switch
upload { firmware_toTFTP | cfg_toTFTP} {<ipaddr>|<ipv6addr>} <path_filename>
DGS-1500-28>
download
Purpose
Syntax
Displays the current IPv4 and IPv6 address of the interface.
Show system information.
Configure password.
Save configuration.
Displays Debug Table.
To display a list of commands.
?
The ? command displays a list of commands of the switch.
None.
None.
{
firmware_fromTFTP
To download and install a firmware, boot, or switch configuration
file from a TFTP server.
download { firmware_fromTFTP | cfg_fromTFTP} {<ipaddr> |
D-Link Web Smart Switch User Manual
|
cfg_fromTFTP}
{<ipaddr>|<ipv6addr>}
96