Panasonic EY4640 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Grinder
  5. EY4640
  6. Operating instructions manual
Panasonic EY4640 Operating Instructions Manual

Panasonic EY4640 Operating Instructions Manual

Cordless angle grinder
Hide thumbs Also See for EY4640:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Operating Instructions Manual
Operating Instructions
Bedienungsanleitung
Instructions d'utilisation
Istruzioni per l'uso
Gebruiksaanwijzing
Manual de instrucciones
Cordless Angle Grinder
Kabelloser Winkelschleifer
Brugsvejledning
Meule d'angle sans fil
Driftsföreskrifter
Smerigliatrice angolare senza fili
Snoerloze haakse slijper
Bruksanvisning
Amoladora angular inalámbrica
Käyttöohjeet
Akku-vinkelslibemaskine
Sladdlös vinkelslipmaskin
Batteridrevet vinkelsliper
Ladattava kulmahiomakone
Model No: EY4640
Before operating this unit, please read these instructions completely and save this manual for future use.
Vor Inbetriebnahme des Gerätes die Betriebsanleitung bitte gründlich durchlesen und diese Broschüre zum späteren Nachschlagen
sorgfältig aufbewahren.
Lire entièrement les instructions suivantes avant de faire fonctionner l'appareil et conserver ce mode d'emploi à des fins de consultation
ultérieure.
Prima di usare questa unità, leggere completamente queste istruzioni e conservare il manuale per usi futuri.
Lees deze gebruiksaanwijzing aandachtig door voor u het apparaat in gebruik neemt en bewaar de gebruiksaanwijzing voor eventuele
naslag.
Antes de usar este aparato por primera vez, lea todas las instrucciones de este manual y guarde el manual para poderlo consultar en el
futuro.
Gennemlæs denne betjeningsvejledning før brugen og gem den til fremtidig brug.
Läs igenom hela bruksanvisningen innan verktyget tas i bruk. Spara bruksanvisningen för senare användning.
Før enheten tas i bruk, vennligst les disse alle anvisningene og oppbevar deretter bruksanvisningen for senere bruk.
Lue ohjeet huolella ennen laitteen käyttöönottoa ja säilytä tämä käyttöohje tallessa tulevaa tarvetta varten.

Advertisement

Table of Contents
loading

Related Manuals for Panasonic EY4640

Summary of Contents for Panasonic EY4640

  • Page 1 Sladdlös vinkelslipmaskin Batteridrevet vinkelsliper Ladattava kulmahiomakone Model No: EY4640 Before operating this unit, please read these instructions completely and save this manual for future use. Vor Inbetriebnahme des Gerätes die Betriebsanleitung bitte gründlich durchlesen und diese Broschüre zum späteren Nachschlagen sorgfältig aufbewahren.

  • Page 2: Intended Use

    Other languages use proper guards when grinding. I. INTENDED USE How to Use This Manual Thank you for purchasing the Panasonic • Please read this manual completely Angle Grinder. The powerful grinding before starting to use your grinder. If action of this tool, combined with the...

  • Page 3: Additional Safety Rules

    7) Do not use a damaged accessory. II. ADDITIONAL Before each use inspect the ac- cessory such as abrasive wheels SAFETY RULES for chips and cracks. If power tool or accessory is dropped, inspect Safety instructions for all op- for damage or install an unda- erations maged accessory.

  • Page 4: Further Safety Instructions For All Operations

    Further safety instructions for 11) Position the cord clear of the spinning accessory. If you lose all operations control, the cord may be cut or Kickback and Related Warnings snagged and your hand or arm may Kickback is a sudden reaction to a be pulled into the spinning acces- pinched or snagged rotating wheel, sory.

  • Page 5: Additional Safety Instructions For Grinding And Cutting-Off Opera- Tions

    4) Use special care when working suitable for the higher speed of a corners, sharp edges etc. Avoid smaller tool and may burst. bouncing and snagging the ac- cessory. Corners, sharp edges or Additional Safety Warnings Spe- bouncing have a tendency to snag cific for Abrasive Cutting-Off Op- the rotating accessory and cause loss of control or kickback.
  • Page 6 Always wear eye pro- tection WARNING: • CAUTION: Do not use other than the Panasonic battery packs that are designed for • Always be sure that the side handle use with this rechargeable tool. is installed securely before operation. •...
  • Page 7 Installing or removing disc 4. Push the Spindle lock button to secure the spindle in place, and Inspection before use then use the clamp nut wrench to • Has the correct grinding disc tighten the clamp nut securely. been mounted for the object to be ground? 1.

  • Page 8: Power Switch Operation

    IV. OPERATION WARNING: • It should never be necessary to NOTE: force the tool. The weight of the Be aware that this tool is always in tool applies adequate pressure. an operating condition, since it Forcing and excessive pressure does not have to be plugged into could cause dangerous grinding an electrical outlet.
  • Page 9 • Use the tool in such a way as to 15º-30º to the workpiece surface. prevent the air from the ventilation When using a new grinding disc, do not slots from blowing directly onto work the grinder in the B direction or it will your skin.
  • Page 10 Overheat warning lamp Battery low warning lamp Flashing: Overheat Flashing (No charge) (normal Indicates operation has (normal Battery protection operation) been halted due to battery operation) feature active overheating. To protect the motor or battery, be sure to note the following when car- ssive (complete) discharging of li- Exce rying out this operation.

  • Page 11: Battery Pack Life

    - Accidental re-start preventive function • When the battery pack is removed - Even if the battery pack is inserted from the main body of the tool, re- on the tool with the power switch in place the battery pack cover imme- the “ON”...

  • Page 12: Li-Ion Battery Pack

    • Cool down the charger when charging • Charging will not start if the battery more than two battery packs consecu- pack is warm (for example, imme- tively. diately after heavy-duty operation). The orange standby lamp will be • During charging, the charger may flashing until the battery cools down.
  • Page 13 LAMP INDICATIONS Charging is completed. (Full charge.) Battery is approximately 80% charged. Now charging. Charger is plugged into the AC outlet. Ready to charge. Charging Status Lamp. (Green) (Orange) Left: green Right: orange will be displayed. Battery pack is cool. The battery pack is being charged slowly to reduce the load on the battery.

  • Page 14: Information For Users On Collection And Disposal Of Old Equipment And Used Batteries

    Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.

  • Page 15: Replacing Carbon Brushes

    1. Brush cap Panasonic grinder with approved cover accessories which you purchase 2. Brush cap from your Panasonic distributor or factory service center, be sure to obtain and use all necessary fasten- Carbon brush ers and guards as recommended in this manual.

  • Page 16: Specifications

    VII. SPECIFICATIONS MAIN UNIT Mounting wheel diameter 115 mm Mounting wheel innerhole diameter 22 mm Spindle thread size Motor voltage 14.4 V DC Rated speed 9500 min (rpm) 2.2 kg Weight (with battery pack) Overall length 361 mm Noise, Vibration See the included sheet BATTERY PACK EY9L41...
  • Page 17 A replacement fuse cover can be purchased from your local Panasonic Dealer. IF THE FITTED MOULDED PLUG IS UN- SUITABLE FOR THE SOCKET OUTLET IN Fuse Cover YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.

Table of Contents