Monitoring The Indoor Unit Cycle Data - Samsung MWR-WS00 Installation Manual

Additional Functions (Continued)
14
E-

Monitoring the Indoor Unit Cycle Data

In order to monitor the indoor unit cycle data using the wired
remote controller, hold down the
the button at the same time for 5 seconds.
1 The menu will display
Press the button twice and the menu will display
Press the button.
Note ' ' will be displayed if the indoor unit does
not support the function and the setup mode
cannot be entered.
2 4 digits will be displayed.
The first digit represents the menu and the remaining three
digits are used for data display. Select the menu using
the buttons.
Menu
1 Indoor Temperature
2 EVA IN
3 EVA OUT
4 EEV
3
Press the button to exit.
4
Press the button anytime during setup to exit without
setting.
and buttons and
.
Data
.