a
b
d
c
CYLINDER HEAD
8. Check:
9 "I"mark a
Align the "I" mark on the generator rotor
with the stationary pointer
crankcase.
9 "I"mark c
Align the "I"mark on the camshaft sprocket
with the stationary pointer d on the cylinder
head.
Out of alignment → Correct.
Refer to the installation steps above.
9. Measure:
9 valve clearance
Out of specification → Adjust.
Refer to "ADJUSTING THE VALVE CLEAR-
ANCE" in chapter 3.
10. Install:
9 O-rings
9 water pump assembly
9 water pump assembly bolts
11. Install:
9 spark plug
12. Install:
9 intake manifold bolts
9 intake manifold with carburetor
4-16
http://www.motorcycle.in.th
ENG
b
on the
10 Nm (1.0 m•kg, 7.2 ft•lb)
13 Nm (1.3 m•kg, 9.5 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)