Table of Contents
Advertisement
D-8
Network Driver
Specifying the details of network driver.
One standard network driver that is mounted will be installed automatically, but the link speed and Duplex mode need
to be specified manually.
[When PROSet is not installed]
1.
The [Local Area Connection Properties] dialog box appears.
* Procedure with the standard start menu
1. Click Start, [Control Panel], [Network Connections], and click[Local Area Connection].
* Procedure with the classic start menu
1. Click Start, [Settings] and click [Network Connections].
The [Network Connections] dialog box appears.
2. Right-click [Local Area Connection] and click [Properties] from drop down menu.
2.
Click [Configure].
The property dialog box for network adapter is displayed.
3.
Click [Advanced] and specify [Link Speed & Duplex] value the same as the value specified for the HUB.
4.
Click [OK] on the property dialog box for network adapter.
[When PROSet is installed]
1.
Open the [Device Manager]
2.
Double-click [(Network Adapter Name)] in the list.
3.
Click [Link] and specify [Link Speed & Duplex Settings] value the same as the value specified for the HUB.
4.
Click [OK].
Also, add or delete any protocols and services if necessary.
You can operate the process on the property dialog box for local area network which can be appeared from [Network
and Dial-up Connection].
NOTE:
We recommend you to add [Network Monitor] at [Adding Services]. [Network
Monitor] can monitor the frame (or the packet) that the computer installing [Network
Monitor] sends or receives. This tool is valuable when analyzing network trouble. For
information on how to install the tool, see the "Setting for Solving Problems" described
later in this chapter.
Optional Network Board Driver
Optional Network Board Driver (INTEL PRO/100+ - Intel Pro/1000 + - Intel Pro/1000 MT Dual –
Intel Pro/1000 MF)
If you want to utilize optional Network Board, install the network driver stored in EXPRESSBUILDER CD-ROM.
In case of utilizing Intel Pro/1000 + - Intel Pro/1000 MT Dual – Intel Pro/1000 MF
"CD-ROM Drive Letter:\WINNT\W2K3AMD\NS1\PRO1000\WS03_32E
In case of utilizing INTEL PRO/100+
"CD-ROM Drive Letter:\WINNT\W2K3AMD\NS1\PRO100\WS03_32E"
If the procedure of installation is not clear, refer to the installation procedure described in the section "Installation of the
Advertisement
Table of Contents
