Lubrication Guide - Polaris 500 HHO 2013 Owner's Manual

Maintenance and safety
Table of Contents

Advertisement

Lubrication Guide

Check and lubricate all components at the intervals outlined in the Peri-
odic Maintenance Chart beginning on page 67. Items not listed in the
chart should be lubricated at the General Lubrication interval.
The a-arms and upper control arms are lubricated at the factory, and no
additional lubrication will be needed. However, if these components are
subjected to severe use, grease zerks have been provided for additional
lubrication at the user's discretion.
Item
Engine Oil
Brake Fluid
Transmission Oil
Demand Drive
Fluid (Front
Gearcase)
Front Prop Shaft
Yoke
Lube
PS-4 PLUS
Performance
Synthetic 2W-50
DOT 4 Only
AGL PLUS
Transmission Fluid
Demand Drive
PLUS Fluid
POLARIS Pre-
mium U-Joint Lube
MAINTENANCE
Capacity at
Fluid Change
2 qt. (1.9 l)
See page 72.
---
See page 30.
32 oz. (948 ml) See page 77.
9 oz. (265 ml)
See page 79.
---
Grease fittings (3 pumps
maximum) every 500 miles,
before long periods of stor-
age, or after pressure wash-
ing or submerging.
Front Prop Shaft Yoke
Inspection Procedure
71

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sportsman touring 500 ho 2013

Table of Contents