Lubrication Guide - Polaris Sportsman X2 550 EPS Owner's Manual

Lubrication Guide

Check and lubricate all components at the intervals outlined in the
Periodic Maintenance Chart beginning on page 91. Items not listed in
the chart should be lubricated at the General Lubrication interval.
The a-arms and upper control arms are lubricated at the factory, and no
additional lubrication will be needed. However, if these components are
subjected to severe use, grease zerks have been provided for additional
lubrication at the user's discretion.
Item Recommended
Engine Oil PS-4 5W-50
4-Cycle Oil
Transmission AGL Gearcase
Oil Lubricant &
Transmission
Fluid
Demand Drive Demand Drive
Fluid (Front Fluid
Gearcase)
Rear ATV Angle Drive
Gearcase Oil Fluid (or GL5 80-
90 weight gear
lube)
Brake Fluid DOT 4 Brake
Fluid
ADC Fluid Demand Drive
Fluid
Front Prop U-Joint Grease
Shaft Yoke
A-Arms, Front POLARIS All-
and Rear Season Grease
Front Prop Shaft Yoke
Capacity
Lubricant at Fluid
Change
(1.9 l)
37 oz.
(1100 ml)
9.3 oz.
(275 ml)
6.1 oz.
(180 ml)
Grease fittings (3 pumps maximum) every 500 miles,
before long periods of storage, or after pressure
washing or submerging.
Grease fittings after extreme use or if suspension
becomes squeaky.
Fill Plug
Torque
2 qt. ---
10-14 ft. lbs.
(14-19 Nm)
8-10 ft. lbs.
(11-14 Nm)
10-14 ft. lbs.
(14-19 Nm)
--- ---
--- ---
MAINTENANCE
Drain Plug
Torque
15-17 ft. lbs. Page 96.
(20-23 Nm)
10-14 ft. lbs. Page 100.
(14-19 Nm)
11 ft. lbs. Page 102.
(15 Nm)
10-14 ft. lbs. Page 106.
(14-19 Nm)
--- Page 32.
--- Page 104.
Front
Inspection
Procedure
95