Motorola Netopia 2200 Series User Manual page 175

SHELL Commands
quit
Exits the Motorola Netopia® Gateway command line interface.
reset arp
Clears the Address Resolution Protocol (ARP) cache on your unit.
reset atm
Resets the Asynchronous Transfer Mode (ATM) statistics.
reset cdmode
This command will set up one boot flag so that the next time a 3342N/3352N restarts or
reboots (power cycle), the Gateway will boot into CD-ROM mode instead of Gateway mode.
This command is only for the 3342N/3352N. If the Gateway is not a 3342N/3352N this
command does nothing but returns the message: "CD mode is not supported on this plat-
form."
reset crash
Clears crash-dump information, which identifies the contents of the Motorola Netopia®
Gateway registers at the point of system malfunction.
reset dhcp server
Clears the DHCP lease table in the Motorola Netopia® Gateway.
reset diffserv
Resets the Differentiated Services (diffserv) statistics.
reset enet [ all ]
Resets Ethernet statistics to zero. Resets individual LAN switch port statistics as well as
wireless and WAN Ethernet statistics (where applicable).
175