Sony KDL-32XBR6 Operating Instructions Manual page 11

•
Connects to the composite video and audio output jacks on your
AN
equipment.
Description
Connects to the S VIDEO output jack of video equipment. If both composite video and
S VIDEO are connected, S VIDEO signal has priority.
• If you have mono equipment, connect its audio output jack to the TV's L (MONO)
audio input jack.
~
:::::
~'
en
6l
._------~ ~
Connects to your equipment's component video (YPBPR) and audio (L/R) jacks.
Q.
Connects to a personal computer's video and audio output connector (see page 14). Can
also be connected to other analog RGB equipment. See "PC Input Signal Reference
Chart" on page 14 for the signals that can be displayed.
VIDEO IN 2/3
VIDEO/L(MONO)-
AUDIO-R
Item
[I]
VIDEO IN 1
S VIDEO
[2]
COMPONENT IN
1/2 (1 080p/1 080il
720p/480p/480i)1
L-AUDIO-R
- - - - - - ~ . _ - - - - _ . -
~ PCIN
(RGB/AUDIO)
$:sJ
• For some Apple Macintosh computers, it may be necessary to use an adapter (not
supplied). If this is the case, connect the adapter to the computer before connecting the
HOIS-HDIS cable.
• If the picture is noisy, flickering or not clear, adjust Phase and Pitch of Screen
settings on page 36.
HOMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital
audio/video interface between this TV and any HOM I-equipped
AN
equipment. HOMI
supports enhanced, or high-definition video, plus digital audio.
- - - - - ~ - ~ - _ . _ - - - -
@]
HDMI IN
1/213
HDMIIN
4
R-AUDIO-L
If the equipment has a DVI jack and not an HOMI jack, connect the OVI jack to the
HOMI IN 4 (with OVl-to-HOMI cable or adapter) jack, and connect the audio jack to the
AUDIO IN (L/R) jacks of HOMI I 4.
¢S;
• Be sure to use only an HOMI cable that bears the HDMI logo.
• When connecting a DVI-equipped PC to an HDMI jack, also connect an Audio cable
between the PC and R-AUOIO-L jack.
---_._-_._---
lliJ
DMexl
This USB port is for service only unless you are connecting the optional BRAVIA
SERVICE
external module (OMe
x ) .
. .
_--_
..
_
..
_ - - - - - - . _ - - ~ - - - - - - - _ . _ - - - - - - - - - - - - - - - - _ . _ - - - - ~ . _ - - - - ~
[§]
DIGITAL OUT
Connects to the optical audio input of your digital audio equipment that is PCM/Oolby*
(OPTICAL)
Digital compatible.
~ _ . _ - - - - - - - - -
. _ - - - - - - - -
- - - - - ~ _ .
[l]
AUDIO OUT (VARI Connects to the left and right audio input jacks of your analog audio equipment. You can
FIX)
use these outputs to listen to your TV's audio through your stereo system.
- - - - - - - - - - - - - - - - - - - - - - - ~ . _ . _ - - - - ~ - - - - - -
..
_ - - - - - - - - - - ~ - - ~ _ . _ - - - -
[ID
CABLEI
RF input that connects to your cable or VHF/UHF antenna.
ANTENNA
[ill
AC power cord or
ACIN
- - - - - - - - - - - - - - - - - - - - - - - - - - _ . - -
- - -
Connects to your power source. For models with attached cords: Plug the cord into the
nearest wall outlet. For models with separate cords: Connect the supplied power cord to
AC IN and the nearest wall outlet.
" ManufaclUred under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolhy Lahoratories.
11