Replacing the Saddle Stitcher Unit Staple Cartridge
This procedure is only required when Saddle Finisher-C2 is installed.
When the Finisher runs out of staples, the staple cartridge must be
replaced. The message on the left will appear in the touch panel display.
Follow the procedure described below to replace the staple cartridge.
1
Open the front cover (lower) of the Finisher.
2
Pull out the saddle stitcher unit.
3
Pull forward the stapler unit of the saddle
stitcher unit, then push it up.
Finisher-C1/Saddle Finisher-C2
7–27