Table of Contents
Advertisement
MANUAL SETUP
Use to manually adjust the various parameters related to
the audio and video input.
SET MENU
~
MANUAL SETUP
~
INPUT MENU
3) IHPUT t' l E HU
-+
!=l)
HIPUT
ASSIG~IME~H
B) HIPUT t'10DE
Co INPUT TRIM
D) INPUT
RENA~lE
E)HDt'1I SET
F)XM ANTENNA LEVEL
[.al/[Tl:
Up/Do~Jn
[HITERl: Enter
•
INPUT ASSIGNMENT (Input assignment)
Use to assign the HDMI IN jacks of this unit to other
components if the initial settings of this unit do not
correspond to your needs. By assigning other components
to the HDMI IN jacks of this unit, you can display the
names of the connected components in the front panel
display and OSD and operate the components with the
input selector buttons of the same name. If you connect a
component to one of the HDMI IN jacks of this unit and
do not assign a name to it, the default component name for
HDMI IN jack is displayed in the front panel and OSD
when selected.
• Select HDMII to assign a component to the HDMI
AUX I IN jack of this unit.
Choices:
TV/STB,
DVD, AUXI, AUX2
• Select HDMI2 to assign a component to the HDMI
DVD IN jack of this unit.
Choices:
DVD,
AUXI, AUX2, TV/STB
R) HIPUT RSSIIJI' U ' l H l T
1/' 3
HNII
-+ HDMII····
TV/STB
(
HJ/STB)
HDt'1I2····
DUD
(
DUD
[.a]/[Tl:Up/Down [-tll/[lt-l:Sel
[ENTER]: Return
82
En
• Select COMPONENT to assign a component to the
COMPONENT VIDEO INPUT jack of this unit.
Choices:
DVD,
AUX I, AUX2, TV ISTB
R) IHPUT RSSIGHt' 1 Hl T 2/' 3
cmlPONE~H
-+ Line!····
DVD
(
DUD
[.a]/[Tl:Up/Down [-tI]/[lt-]:Sel
[ENTERl:Return
• Select COMPOSITE to assign a component to the
VIDEO INPUT jack of this unit.
Choices:
TVISTB,
DVD, AUXI, AUX2
R) HlPUT RSSIIJI,U' l H l T 3/3
CO~lPOSITE
-+ Line2····
TV/STB
(
TV/STB)
[.a]/[Tl:
Up/Do~Jn
[-tI]/[lt-]: Sel
[ENTER 1: Return
•
INPUT MODE (Input mode)
Use to designate the input mode for the input sources
connected to the DIGITAL INPUT jacks when you tum on
the power of this unit. For information on the types of
audio signals that can be output by this unit, see "Selecting
the input mode" on page 90.
Choices:
AUTO,
LAST
B) HIPUT t' 1 0DE
It-AUTO
LAST
[-tI]/[lt-]:Select
[E~HER]:
Retllrn
• Select AUTO to set this unit to automatically detect the
type of input signals and select the appropriate input
mode.
• Select LAST to set this unit to automatically select the
last input mode used for that input source. If the type of
input signals is different from the setting, no sounds
will be produced.
Advertisement
Table of Contents
