The Setups For The Mobile Hardware Testing And Testing Results - Asus P526 Service Manual

GTC ■ Service Manual
10. The setups for the mobile hardware testing and
testing results
Front End (RF Switch) : Including GSM antenna trace and the Tx, Rx trace of the front end
module.
GSM antenna trace：To identify whether the GSM antaean trace is conducted or not, the
conductivity between R385 and C340 ( ) should be measured with
Component displacement plot 1
the light meter. If the conductivity between R385 and C340 is poor, it means the MS156 (RF
connector) is broken. Please replace this one with a new MS156. After the replacement, please
check the conductivity of the GSM antenna trace again.
MS156