Table of Contents
Advertisement
22. BT debug
. The setups for the mobile hardware testing and testing
results
1. Methods about BT debug
1.1
Use the software to set the device under BT-Test mode
1.2
Choose the designed channel.
1.3
Touch the BT-Antenna pad (U5) with a RF probe.
1.4
Measure the signal by a spectrum.
1.5
Compare the signal level to a golden sample.
2. Steps of entering BT-Test mode
1. Enter
mode"
Step 1
GTC
■
Service Manual
the
"BT_Pegasus_test
Advertisement
Table of Contents
