Stand Option - Cisco WAP200 Administration Manual

Installing the Access Point

Stand Option

Stand Option
STEP 1
STEP 2
Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster
To place the access point vertically in a stand, follow these steps.
Locate the left side panel of the WAP200 access point.
With the two large prongs of one of the stands facing outward, insert the short
prongs into the little slots in the WAP200 access point, and push the stand upward
until the stand snaps into place.
Repeat this step with the second stand.
4
10