Table of Contents
Advertisement
14
en | Installation
4
Installation
Caution!
Installation must be made by qualified personnel and conform to ANSI/NFPA 70 (the National
!
Electrical Code
and all applicable local codes. Bosch Security Systems, Inc. accepts no liability for any
damages or losses caused by incorrect or improper installation.
Caution!
These units must be properly and securely mounted to a supporting structure capable of
!
sustaining the unit weight. Use care when selecting mounts or pan/tilts (not supplied) for
installation; the mounting surface and unit's weight should be carefully considered.
4.1
Camera requirements
The cameras to be built into the housing must meet the requirements specified below.
Ambient temperature
Power consumption
Voltage for low voltage units
Voltage for high voltage units
Weight without lens
Weight with lens
Temperature under operating conditions
Table 4.1: Specifications for cameras
4.2
Cable requirements
4.2.1
Video transmission (coaxial)
Cable type
runs < 300m (1000 ft)
runs < 600m (2000 ft)
Cable diameter (outer)
Cable shape
Cable shield
Center conductor
DC resistance
RG-59/U
RG-11/U
Cable impedance
Certificating authority
Environmental
2014.05 | 4.0 | F.01U.167.418
(NEC)), Canadian Electrical Code, Part I (also called CE Code or CSA C22.1),
®
0 °C to +50 °C (+32 °F to +122 °F)
10 W (max)
12 VAC to 28 VAC; +12 VDC to +30 VDC
100 VAC to 240 VAC
450 g max
1 kg max
-20 °C to +50 °C (-4 °F to +122 °F)
RG-59/U RG-11/U
4.6 mm to 7.9 mm (0.18 in to 0.31 in)
Round
>93% braided copper
Stranded or solid copper
<15 ohm/1000 m <6 ohm/1000 m
75 ohm
UL
Outdoor rated
Operation Manual
UHI/UHO Series Camera Housing
Bosch Security Systems, Inc.
Advertisement
Table of Contents
