Linksys WVC54GCA User Manual page 10

Chapter 3
14. Review the Camera's settings. To make changes to the
settings, click Back to go back to the previous screen.
If the settings are correct, click Save to continue.
15. When the Wizard informs you that the new Camera
settings have been saved, click Continue.
16. Disconnect the power from the camera. Click
17. Disconnect the network cable from the Camera and
from your switch or router. Click Next.
Disconnect the Network Cable
Wireless-G Internet Home Monitoring Camera
Downloaded from www.Manualslib.com
Save the Camera Settings
Disconnect the Power
manuals search engine
Setting Up and Mounting the Camera
18. Reconnect the power to the Camera. Click
19. The Setup Wizard displays
connected to network. Click Continue, then click
Next on the following screen.
Next.
Congratulations screen appears. Click the desired
20. The
option.
Install Camera Utility
•
• Online Registration
• Exit
Camera's utility later.
Reconnect the Power
Camera successfully
Camera Successfully Connected to Network
Camera Connected to Wireless Network
NOTE: The Camera can also be connected to a
wired network. To do this, connect the network
cable to the Camera before you power on the
Camera. (To connect to a wireless network,
power it on with no network cable attached.)
This installs the Camera's Utility.
This registers your Camera online.
Click this to exit the Setup Wizard and install the
Go to Placement Options, page 10.
Next.
9