System Setup Menu - Sony SRW-1 Operation Manual

4-5 SYSTEM Setup Menu

The SYSTEM Setup menu allows you to make system
settings.
In the Settings column of the following table:
Item
FORMAT
Signal format settings
50
4-5 SYSTEM Setup Menu
Settings
LINE Sets the number of effective lines and the scanning system.
1080I [1080I]
1080P [1080PsF/P]
720P [720P]
FRAME When the SELECT FPS item is set to "OFF", sets the operation frame
frequency. When the SELECT FPS item is set to other than "OFF", sets the
target frame frequency.
23.98 [23.98]: Frame frequency 23.976 Hz
24 [24]: Frame frequency 24 Hz
25 [25]: Frame frequency 25 Hz (field frequency 50 Hz)
29.97 [29.97]: Frame frequency 29.97 Hz (field frequency 59.94 Hz)
50 [50]: Frame frequency 50Hz
59.94 [59.94]: Frame frequency 59.94Hz
For more information, see 6-4 "Common Settings for Slow & Quick Motion
Shooting" (page 76).
SIGNAL Sets the sampling method and video signal recording rate.
422 [4:2:2]: 4:2:2 (Y/Pb/Pr), 440 Mbps
422x2 [4:2:2 Dual Stream]: 4:2:2 (Y/Pb/Pr) DUAL STREAM, 880 Mbps
444SQ [4:4:4 SQ]: 4:4:4 (R/G/B), SQ mode, 440 Mbps
444HQ [4:4:4 HQ]: 4:4:4 (R/G/B), HQ mode, 880 Mbps
Note
Tapes recorded with the 444HQ setting cannot be played back on the SRW-
5000/5500.
For more information on tape formats available for playback on the SRW-
5000/5500, see "About Recording/Playback Tape Formats (Table of
Compatibility with SRW-5000/5500)" (page 95).
SELECT FPS When the HKSR-102 is installed, selects the operating mode of the Select
FPS function.
OFF [Off]: Do not use the Select FPS function.
ON [On]: Enables Select FPS function with frame rate (FPS) set on camera.
DUB [Dub(bypass MY)]: Record without using the HKSR-102. (Select this to
VTR [VTR]: Enables Select FPS function with frame rate (FPS) set on the
For details, see 6-1 "Select FPS Function" (page 70).
Note
When the HKSR-102 is not installed in this unit, the ON and DUB settings
have the same effect.
FPS FORMAT Selects the system format when the Select FPS function is enabled.
DEF [Default]: Use the default settings.
23 [23.98/24]
25 [25]
29/30 [29.97/30]
50 [50]
59/60 [59.94/60]
For details, see 6-1 "Select FPS Function" (page 70).
• Default settings are underlined.
• Square brackets indicate settings as displayed in setting
windows (see the figure for step 3 on page 55).
dub a tape recorded with the Select FPS function.)
SRW-1.