Hitachi C 10FM Technical Data And Service Manual page 12

4. Remove the Truss Hd. Step Screw M6 x 12 [14] and the Truss Hd. Step Screw M6 x 14 [15] that fix the Lever
[16]. Remove the Lever [16].
5. Secure the Special Nut Chuck M6 [27] behind the Cutter Shaft Guard [26] with a 10 mm wrench. Remove the
Counter Hd. Screw M6 x 16 [18], Collar [19], PC-Guard [20], Hex. Nut M6 [23] and Spring Guard [24].
B. Disassembly of the base section
Tools required:
• 3 mm hex. bar wrench
• Phillips head screwdriver
• 19 mm wrench
• Plastic hammer
• D10 metal bar
• 6 mm hex. bar wrench
• 10 mm wrench
• 13 mm box wrench
Fig. 8
--- 10 ---