No.mb160)1 - JVC MX-GB6 Service Manual

3.1.7 Removing the heat sink
(See Figs.21 to 23)
• Prior to performing the following procedures, remove the top
cabinet, CD changer mechanism assembly and amplifier
board.
(1) From the reverse side of the amplifier board, remove the
two screws P attaching the heat sink. (See Fig.21.)
(2) From the forward side of the amplifier board, remove the
four screws Q attaching the power amplifier IC on the heat
sink. (See Fig.22.)
(3) From the bottom side of the heat sink, remove the four
screws R attaching the brackets on the heat sink. (See
Fig.23.)
1-14 (No.MB160)
P
Fig.21
Power amplifier IC
Amplifier board
Q
Fig.22
Bracket
Heat sink
R
Fig.23
Amplifier board
P
Heat sink
Bracket
R