Mini-Pci Lan; Pc Card Assembly - NEC Versa FXi Series Service And Reference Manual

Mini-PCI LAN

Use the following procedure to remove the mini-PCI LAN (if installed).
1. Remove the keyboard, front cover assembly, and top cover assembly from the system.
Disconnect the mini-PCI LAN from connector P27 on the main board
2.
Locate and remove the two screws securing the mini-PCI LAN.
3.
A – Screw
4. Remove the mini-PCI LAN from the system.

PC Card Assembly

Use the following procedure to remove the PC card assembly.
Remove the keyboard, front cover assembly, and top cover assembly from the system.
1.
The PC card assembly is located in the left-side bay under the front cover. Remove the PC
2.
card assembly as follows:
T
Remove the four screws securing the assembly to the system.
T
Pull up the assembly to disconnect it from the I/O board (the PC card assembly's board
sits directly above the I/O board connector).
T
Lift the assembly out of the system.
Removing the mini-PCI LAN
B – Mini-PCI LAN
Disassembly and Reassembly 3-11