Engine Speed Limiter; Shift Lock Release - Honda 2000 Odyssey Owner's Manual

Main Menu
Table of Contents
Second (2) — To shift to Second,
pull the shift lever towards you, then
shift to the lower gear. This position
locks the transmission in second
gear. It does not downshift to first
gear when you come to a stop.
Second gives you more power when
climbing, and increased engine
braking when going down steep hills.
Use second gear when starting out
on a slippery surface or in deep snow.
It will help reduce wheelspin.
When driving down hill with a trailer,
use the Second position.
First (1) — To shift from Second to
First, pull the shift lever towards you,
then shift to the lower gear. With the
lever in this position, the transmis-
sion locks in First gear. By upshift-
ing and downshifting through 1, 2,
D and D , you can operate this
3 4
transmission much like a manual
transmission without a clutch pedal.

Engine Speed Limiter

If you exceed the maximum speed
for the gear you are in, the engine
speed will enter into the tachometer's
red zone. If this occurs, you may feel
the engine cut in and out. This is
caused by a limiter in the engine's
computer controls. The engine will
run normally when you reduce the
RPM below the red zone.
Automatic Transmission

Shift Lock Release

This allows you to move the shift
lever out of Park if the normal
method of pushing on the brake
pedal and pulling the shift lever does
not work.
1. Set the Parking brake.
2. Remove the key from the ignition
switch.
3. Place a cloth on the edge of the
shift lock release slot cover on the
steering column. Remove the
cover by carefully prying on the
edge with a small flat-tipped
screwdriver (not included in the
toolkit).
CONTINUED
Driving