Specifications - Makita UH200D Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Strokes per minute (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbol
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Take particular care and attention.
･
Read instruction manual.
･
Do not expose to rain.
･
Danger; be aware of thrown objects.
･
Keep bystanders away.
･
Cutting means continues to run after the
motor is switched off.
･
Cd Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for trimming hedges.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 2.5 dB(A)
The noise level under working may exceed 80 dB (A).
Model
Blade length
-1
)
Overall length
Net weight
Rated voltage
) : 73.7 dB(A)
pA
END011-3
Vibration
The vibration emission value determined according to
EN60745 :
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
ENE014-1
machine(s):
Designation of Machine:
Cordless Hedge Trimmer
ENG104-2
Model No./ Type: UH200D
Specifications: see "SPECIFICATIONS" table.
are of series production and
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
2
UH200D
200 mm
1,250
460 mm
1.2 kg
D.C. 10.8 V
Wear ear protection.
2
) : 2.5 m/s
h
2
Corporation as the
ENG244-1
or less
ENG901-1
ENH021-5
responsible