Basic Controls - Panasonic TH-80LFB70U Operating Instructions Manual

Basic Controls

Main Unit
Touch panel IR transmission part
Installed on the four sides of the display panel.
Remote control
sensor
Enter / Aspect button
(see page 23, 46)
Volume Adjustment
ENTER/
Volume Up "+" Down "–"
When the menu screen is displayed:
+
/
"+" : press to move the cursor up
VOL
"–" : press to move the cursor down
-
/
(see page 46)
MENU Screen ON / OFF
MENU
Each time the MENU button is pressed, the menu screen will switch. (see
page 46)
INPUT
Normal Viewing
Sound
INPUT button (INPUT signal selection)
(see page 20)
Main Power On / Off Switch
Power Indicator
The Power Indicator will light.
• Power-OFF .... Indicator not illuminated (The unit will still
consume some power as long as the power
cord is still inserted into the wall outlet.)
• Standby ........ Red
Orange (When "Slot power" is set to "On" and
Terminal Board is installed. See page 74)
Orange (Depending on the type of the function board
installed, when the power is supplied to the slot)
Orange (When "Control I/F Select" is set to "DIGITAL
LINK/LAN" or "Wireless Network Standby" is set to "On".
Refer to "Operating Instructions, Network Operations")
Orange (When "Quick Launch" is set to "On". See page 59)
• Power-ON ...... Green
• HDMI1 Power management
HDMI2 Power management
......................... Orange (With HDMI1 or HDMI2 input signal. See page 63)
* These functions are not supported by TH-80LFB70E.
• PC Power management (DPMS)
......................... Orange (With PC input signal. See page 63)
• DVI-D Power management
......................... Orange (With DVI input signal. See page 63)
Note:
If the power indicator is orange, power consumption during standby
is generally larger than that of when the power indicator is red.
Brightness Sensor
Detects the brightness in the viewing environment. (see page 63)
USB (VIEWER): Connect to USB memory. (see page 31)
USB (TOUCH): When using the "WhiteBoard
SLOT: Terminal board (optional accessories) insert
slot (see page 4 )
Note:
The upper side slot is for terminal board with 2-slot
width. The terminal board with 1-slot width does not
function when installed in the upper side slot.
Picture
Pos. /Size Setup
Software" from the supplied CD-ROM,
connect the computer via USB cable.
(see page 44)
21