1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Monitor
  5. TH-80LFB70U
  6. Operating instructions manual

Panasonic TH-80LFB70U Operating Instructions Manual

Touch screen lcd display
Hide thumbs Also See for TH-80LFB70U:
Table of Contents

Advertisement

Quick Links

Operating Instructions
Display Operations
Touch Screen LCD Display (for business use)
Please read these instructions before operating your set
English
and retain them for future reference.
Model No.
TH-80LFB70U
TH-80LFB70E
TH-80LFB70W

Advertisement

Table of Contents
loading

Related Manuals for Panasonic TH-80LFB70U

Summary of Contents for Panasonic TH-80LFB70U

  • Page 1 Model No. TH-80LFB70U TH-80LFB70E TH-80LFB70W Operating Instructions Display Operations Touch Screen LCD Display (for business use) Please read these instructions before operating your set English and retain them for future reference.

  • Page 2: Table Of Contents

    Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new LCD Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference.

  • Page 3: Important Safety Instructions

    CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to quali¿ ed service personnel. The lightning flash with The exclamation point within arrow-head within a triangle a t r i a n g l e i s i n t e n d e d t o is in tend ed to tell the user...

  • Page 4: Fcc Statement

    Any changes or modi¿ cations not expressly approved by Panasonic Corp. of North America could void the user’s authority to operate this device.

  • Page 5: Important Safety Notice

    If the plug contains a removable fuse cover, you must ensure that it is re¿ tted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic dealer. Do not cut off the mains plug.

  • Page 6: Safety Precautions

    • If water is spills onto the Display or foreign objects get inside it, a short-circuit may occur which could result in ¿ re or electric shock. If any foreign objects get inside the Display, please consult your local Panasonic dealer.
  • Page 7 If water or foreign objects get inside the Display, if the Display is dropped, or if the cabinet becomes damages, disconnect the power supply plug immediately. • A short circuit may occur, which could cause ¿ re. Contact your local Panasonic dealer for any repairs that need to be made.

  • Page 8: Cleaning And Maintenance

    Safety Precautions CAUTION When using the LCD Display Do not bring your hands, face or objects close to the ventilation holes of the Display. • Heated air comes out from the ventilation holes at the top of Display will be hot. Do not bring your hands or face, or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result.

  • Page 9: Touch Panel

    Safety Precautions Touch panel Carefully observe the following instructions as the display has an optical touch panel. Do not expose the display to direct sunlight or strong light source during use. • Otherwise malfunction may occur since the optical touch panel of the display uses infrared rays. After turning on the power of the display, do not touch the IR transmission part IR transmission part and the screen until any image is displayed.

  • Page 10: Accessories

    (see page 44) Wireless Manager ME (Windows/Mac) Allows the image on the computer screen to be sent wirelessly or via wired LAN. Switch the input to Panasonic APPLICATION before use. For more details, see the instruction manual of Wireless Manager ME.

  • Page 11: Remote Control Batteries

    Accessories Remote Control Batteries Requires two R6 batteries. 2. Insert batteries - note correct 3. Replace the cover. 1. Pull and hold the hook, then open polarity (+ and -). the battery cover. “R6 (UM3)” size Helpful Hint: For frequent remote control users, replace old batteries with Alkaline batteries for longer life.

  • Page 12: Connections

    Connections AC cord connection and ¿ xing, cable ¿ xing AC cord ¿ xing Unplug the AC cord Unplug the AC cord pressing the two knobs. Plug the AC cord into the display unit. Note: Plug the AC cord until it clicks. When disconnecting the AC cord, be Note: Make sure that the AC cord is locked on...

  • Page 13: Speaker Connection

    Connections Speaker connection Please use 8 /10 W speaker. Black Black While pressing the lever, Return the lever. insert the core wire. Video equipment connection SLOT: Terminal board (optional accessories) insert slot (see page 4) Note: The upper side slot is for terminal board with 2-slot width. The terminal board with 1-slot width does not function when installed in the upper side slot.

  • Page 14: Video And Component / Rgb In Connection

    Connections VIDEO and COMPONENT / RGB IN connection Note: Additional equipment, cables and adapter plugs shown are not supplied with this set. AUDIO Stereo mini plug (M3) VIDEO Pin-BNC Notes: Adapter plug • Change the “Component/RGB-in select” setting in the “Setup” AUDIO 1 IN: menu to “Component”...

  • Page 15: Dvi-D In Connection

    Connections DVI-D IN connection Shared with PC IN. PC with DVI-D video out Stereo mini plug (M3) Less than Less than Ferrite core 1.97 inch (5 cm) 1.97 inch (5 cm) (supplied) DVI-video cable (Within 5 m) Installing the Ferrite core Pull back the tabs Open the Route the...

  • Page 16: Pc Input Terminals Connection

    Connections PC Input Terminals connection Shared with DVI-D IN. COMPUTER Conversion adapter (if necessary) (Female) Mini D-sub 15p PC cable (Male) Audio Stereo mini plug (M3) Connect a cable which matches the audio output terminal on the computer. Notes: • With regard to the typical PC input signals that are described in the applicable input signals list (see page 85), adjustment values such as for the standard picture positions and sizes have already been stored in this unit.

  • Page 17: Serial Terminals Connection

    • If an incorrect command is sent by mistake, this unit will send an “ER401” command back to the computer. • S1A and S1B of Command IMS are available only when a dual input terminal board is attached. • Consult your local Panasonic dealer for detail instructions on command usage.

  • Page 18: Pc Out Connection

    • The following input signals cannot be output. Component input (COMPONENT/RGB IN) Composite video input (VIDEO) Miracast image (Miracast(TM)) Wireless Manager (Panasonic APPLICATION) Pin Layout and Signal Names of Monitor Out Terminal (Mini-D-sub 15P) Pin No. Signal Name Pin No.

  • Page 19: Example Connection Using The Digital Link Terminal

    Example connection using the DIGITAL LINK Terminal A twisted pair cable transmitter such as the Panasonic Digital Interface Box (ET-YFB100G) uses twisted pair cables to transmit inputted video and audio signals, and these digital signals can be input to the Display via the DIGITAL LINK terminal.

  • Page 20: Power On / Off

    Power On / Off Connecting the AC cord plug to the Display. Connecting the plug to the Wall Outlet Notes: • Main plug types vary between countries. The power plug shown at right may, therefore, not be the type ¿ tted to your set. •...
  • Page 21 Power On / Off When ¿ rst switching on the unit Following screen will be displayed when the unit is turned on for the ¿ rst time. Use the remote control to make the settings. Pressing the buttons on the main unit or multi-touch operation will not work.

  • Page 22: Selecting The Input Signal

    To prevent such a problem, using the screensaver is recommended. (see page 61) • The connection of the Wireless Manager is interrupted if the input is switched from Panasonic APPLICATION to Miracast(TM) or MEMORY VIEWER. The connection of Miracast is interrupted if the input is switched from Miracast(TM) to Panasonic APPLICATION or MEMORY VIEWER.

  • Page 23: Basic Controls

    Basic Controls Power Indicator Main Unit The Power Indicator will light. • Power-OFF ..Indicator not illuminated (The unit will still consume some power as long as the power cord is still inserted into the wall outlet.) • Standby ..Red Orange (When “Slot power”...

  • Page 24: Remote Control Transmitter

    Basic Controls Remote Control Transmitter OFF TIMER button The Display can be preset to switch to stand-by after a ¿ xed period. The setting changes to 30 ACTION button minutes, 60 minutes, 90 minutes and 0 minutes Press to make selections. (off timer cancelled) each time the button is pressed.

  • Page 25: Aspect Controls

    For details about the aspect mode, please see “List of Aspect Modes” (page 83). [from the unit] ENTER/ The aspect mode changes each time the ENTER button is pressed. [For TH-80LFB70U] For VIDEO (S VIDEO) signal input: ZOOM FULL JUST For PC signal input: For SD signal input (525 (480) / 60i •...

  • Page 26: Digital Zoom

    Digital Zoom This displays an enlargement of the designated part of the displayed image. Display the operation guide. Exit Press to access Digital Zoom. The operation guide will be displayed. During Digital Zoom, only the following buttons can be operated. [Remote control] OFF TIMER button [Unit]...

  • Page 27: Multi Pip

    There are two modes for two screen display: Pic in Pic Displays two input images combined. The following four system inputs are combined: Main screen input SLOT INPUT A Panasonic APPLICATION Sub screen input B SLOT INPUT C HDMI1/HDMI2/DVI/DIGITAL LINK/COMPONENT/PC D VIDEO Note: Two screen display cannot be displayed with the same system inputs such as HDMI1-DVI combined.

  • Page 28: Multi-Touch Operation

    Multi-touch Operation The built-in touch panel function of the display enables the screen control with a ¿ nger or the supplied pen. This section explains about the multi-touch operation on the display main unit. Note: To enable multi-touch operation, select “Setup” - “Touch Screen Settings” and set “Touch Screen” to “On”. (see page 59) Touch gestures You can use the following touch operations.
  • Page 29 Multi-touch Operation Name Operation Zoom in Touch Zoom operation Pinch out with two ¿ ngers Enlarging the image. Zoom out Touch Zoom operation Pinch in with two ¿ ngers Shrinking the image. Operations that can be performed with multi-touch gestures Selecting the input and adjusting the volume (see page 28) Touch Zoom (see page 29) Memory Viewer operation (see page 30)
  • Page 30 Control menu Displaying the control menu Control menu INPUT HDMI1 HDMI2 SLOT INPUT VIDEO COMPONENT DIGITAL LINK Miracast(TM) Panasonic APPLICATION MEMORY VIEWER WHITEBOARD Display Settings Picture Sound Pos./Size Setup Recall Volume Swipe from the screen edge. Swiping from the right edge of the screen will display the control menu on the right.

  • Page 31: Touch Zoom

    Swipe from the screen edge to display the control menu. INPUT HDMI1 HDMI2 SLOT INPUT VIDEO COMPONENT Control menu see page 28 DIGITAL LINK Miracast(TM) Panasonic APPLICATION MEMORY VIEWER WHITEBOARD Control menu Display Settings Picture Sound Pos./Size Setup Recall Volume The Touch Zoom mode is now active.

  • Page 32: Memory Viewer Function

    Memory Viewer Function The Memory Viewer function makes it is possible to display the video and pictures which are stored in the USB memory when the USB memory is inserted into the display. What you can display with the Memory Viewer function The following ¿...
  • Page 33 Memory Viewer Function Inserting the USB memory Insert the USB memory to the USB (VIEWER) port on the side of the display. (VIEWER) USB MEMORY Notes: • When inserting the USB memory, con¿ rm the direction of the plug not to damage the terminal. •...
  • Page 34 Memory Viewer Function Displaying the Memory Viewer screen Remote control operation Touch operation Press to select the MEMORY VIEWER Tap MEMORY VIEWER in the control menu. input. MEMORY VIEWER If “MEMORY VIEWER” has been assigned to a FUNCTION button, simply pressing it can switch the Control menu see page 28 input to MEMORY VIEWER.
  • Page 35 Memory Viewer Function Playing the pictures - Remote control Moves between the folder list and thumbnails Select a ¿ le in the same manner in the ¿ le list view. Folder list Press to select the desired folder. The selected folder opens. Thumbnails / File list Press to select the desired ¿...
  • Page 36 Memory Viewer Function Playing the video - Remote control Select the desired ¿ le in the same manner as “Playing the pictures - Remote control”. (see page 33) Folder list Press to select the desired folder. The selected folder opens. Thumbnails / File list Press to select the desired ¿...
  • Page 37 Memory Viewer Function Playing the pictures - Touch operation Tap to open the folder Tap to switch the see page Double-tap to start playing Select a ¿ le in the same manner in the ¿ le list view. Tap the desired folder in the folder list. The selected folder opens.
  • Page 38 Memory Viewer Function Playing the video - Touch operation Select the desired ¿ le in the same manner as “Playing the pictures - Touch operation”. (see page 35) Tap the desired folder in the folder list. The selected folder opens. Tap to select the desired ¿...

  • Page 39: Using Built-In Whiteboard

    Panasonic has no authority and no right to grant you any license, rights and titles to use, modify, copy, distribute and the like of such data or the work.
  • Page 40 Using Built-in WhiteBoard Transparent mode (Drawing on video and still image) Drawing will be made on the image of the computer or HDMI input shown on the display. With any other input than WHITEBOARD, swipe from the screen edge to display the control menu.
  • Page 41 Using Built-in WhiteBoard Main menu Tap the function button of the main menu to activate the desired function. The function buttons displayed differ depending on the mode. Main menu display The main menu will appear on the side where you tap shown in the right or left of the screen.
  • Page 42 Using Built-in WhiteBoard How to perform pen drawing Select the desired function before starting drawing. Note: Always use a ¿ nger or the supplied pen to perform pen drawing. Do not use a hard or sharp tip such as nail, ball-point pen, and pencil.
  • Page 43 Using Built-in WhiteBoard Selecting the mode Tap “Mode selection” of the main menu to switch the drawing mode. Switches to the Whiteboard mode. The input does not switch to WHITEBOARD. Switches to the transparent mode. Mode selection Notes: • When the input is WHITEBOARD, only the WhiteBoard mode can be used. It is not possible to change the mode.
  • Page 44 Using Built-in WhiteBoard Saving pen drawing content (Page Menu) Page Menu will be enabled in the WhiteBoard mode or during drawing on the captured image. The drawn content and its background can be saved in the built-in memory or USB memory and can be read as a see page. Connect a USB memory to the USB (VIEWER) terminal on the side of the display.
  • Page 45 The attached ¿ le will be named in order from img00001.jpg up to img99999.jpg every time sent by e-mail. Sending by e-mail in the main menu. Check the destination address(es) and tap “Ok”. Selecting the destination addresses E-Mail E-Mail address aaa@jp.panasonic.com aaa@jp.panasonic.com bbb@jp.panasonic.com @jp p Notes: ccc@jp.panasonic.com ccc@jp.panasonic.com ddd@jp.panasonic.com...

  • Page 46: Using Whiteboard Software

    Using WhiteBoard Software The “WhiteBoard software” included in the supplied CD-ROM allows you to perform various functions in addition to pen drawing, such as controlling computer's desktop with touch gestures. Preparation Connect the computer to the USB (TOUCH) terminal on the side of the display with the supplied USB cable.

  • Page 47: Using Miracast(Tm)

    Using Miracast(TM) The function allows the image shown on the smartphone or tablet device to be sent and displayed on the display. Select the Miracast(TM) input. The display switches to the [Miracast(TM)] screen and the standby screen will be displayed. Start the Miracast application on the Miracast-compatible device or computer Connect the device of the name shown on the display.

  • Page 48: On-Screen Menu Displays

    On-Screen Menu Displays Remote Control Unit Display the menu screen. Press. Display Settings ENTER/ Picture Press to select. Sound (Example: Picture menu) Pos./Size Setup Recall Press several times. MENU Select the item. Select. ENTER/ Picture Press. Normalise Normal Picture Mode Normal Backlight Select.
  • Page 49 On-Screen Menu Displays Menu operation with multi-touch gestures Swipe from the screen edge to display the control menu Control menu see page 28 Tap the desired menu The selected menu screen is displayed. Display Settings Picture Sound Pos./Size Setup Recall Tap the desired item Sound Tap [Back] to return to the previous screen.

  • Page 50: Adjusting Pos./Size

    This setting will be invalid and will not work under the following conditions: • When one of the following inputs is selected Miracast(TM), MEMORY VIEWER, WHITEBOARD, Panasonic APPLICATION • When VIDEO signal input • During two screen or Digital Zoom.
  • Page 51 Adjusting Pos./Size Notes: • If the dot clock frequency of an analog signal is 162 MHz or higher, “Dot Clock” and “Clock Phase” cannot be automatically corrected. • When digital signal input, Dot Clock and Clock Phase cannot be made. •...
  • Page 52 Adjusting Pos./Size Clamp Position (During Component/PC input signal) Adjusts the clamp position when black parts of the image have no detail due to underexposure or are tinged with green. Optimum value for Clamp Position adjustment When black parts have no detail due to underexposure (blackout) Value that causes least blackout is the optimum.

  • Page 53: Picture Adjustments

    Picture Adjustments Press to display the Picture menu. Select to adjust each item. Press to select the menu to adjust. Select the desired level by looking at the picture behind the menu. Note: Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting.

  • Page 54: Advanced Settings

    Picture Adjustments Notes: Item Effect Adjustments • You can change the level of each function Adjusts luminance of the back (Contrast, Brightness, Colour, Hue, Backlight light. Darker Brighter Sharpness) for each Picture Mode. • The setting details for Normal, Dynamic Selects the proper brightness Contrast* and Cinema respectively are memorized...

  • Page 55: Picture Pro¿ Les

    Picture Pro¿ les Up to 8 combinations of picture adjustment values (in the Picture menu and Advanced settings) can be stored in the display memory as pro¿ les and applied as needed, for a convenient way to enjoy your preferred picture settings. Picture Normalise Normal...

  • Page 56: Saving Pro¿ Les

    Picture Pro¿ les Saving pro¿ les Follow these steps to save picture adjustment values as pro¿ les. Specify the picture quality in the Picture menu and Enter a name for the pro¿ le. Advanced settings. (see page 51, 52) [Entering pro¿ le names] Pro¿...

  • Page 57: Loading Pro¿ Les

    Picture Pro¿ les Loading pro¿ les Load pro¿ les and apply the picture adjustment values to the display as follows. Note: Loaded pro¿ les are stored in memory according to the selected input terminal. (see page 20) In the Picture menu, select “Memory load”. Select the pro¿...

  • Page 58: Sound Adjustment

    Sound Adjustment Sound Press to display the Sound menu. Normalise Normal Speaker Internal Select to adjust each item. Sound Mode Normal Bass Press to select the menu to adjust. Treble Select the desired level by listening to the sound. Balance Surround Audio Out (PIP) Main...

  • Page 59: Setup Menu

    Setup menu Press to display the Setup menu. Setup Press to select the menu to adjust. Touch Screen Settings MULTI PIP Settings Network Settings Memory Viewer Settings Signal Screensaver Press to adjust the menu. ECO Mode settings Input label Function Button Settings On/Off Timer Settings Day/Time Settings Component/RGB-in select...

  • Page 60: Day/Time Settings / On/Off Timer Settings

    Day/Time Settings / On/Off Timer Settings The timer can switch the Display On or Off. Before attempting Timer Set, con¿ rm the Time and adjust if necessary. Then set POWER ON Time / POWER OFF Time. Press to display the Setup menu. Press to select On/Off Timer Settings or Day/Time Settings.

  • Page 61: Touch Screen Settings

    Touch Screen Settings Sets the multi-touch function and built-in WhiteBoard. Select “Touch Screen Settings” in “Setup” menu and press button. Touch Screen Settings Touch Screen Touch Screen To enable the multi-touch function, set this to “On”. Flick menu bar When this is set to “On”, “WHITEBOARD Settings” are enabled. WHITEBOARD Settings Quick Launch Flick menu bar...

  • Page 62: Multi Pip Settings

    MULTI PIP Settings Set the two screen display function. Two screen display function MULTI PIP (page 25) Select “MULTI PIP Settings” in “Setup” menu and press button. MULTI PIP Settings MULTI PIP Pic in Pic PIP Mode COMPONENT Main input Sub input VIDEO Sub screen size...

  • Page 63: Screensaver (For Preventing Image Retention)

    Screensaver (For preventing image retention) Do not display a still picture, especially in 4:3 mode, for any length of time. If the display must remain on, a Screensaver should be used. Select “Screensaver” in “Setup” menu and press button. Screensaver Function selection Time 10:00...

  • Page 64: Setup Of Screensaver Time

    Screensaver (For preventing image retention) Setup of Screensaver Time After selecting Time Designation, Interval or Standby after SCR Saver, the relevant Time Setup will become available for selection and the Operating Time may be set. (Time cannot be set when “Mode” is “On” or “Off”.) Press to select Start Time / Finish Time Screensaver (when Time Designation is selected).

  • Page 65: Eco Mode Settings

    Note: When this function is set to “On” or “Sensor”, the “Backlight” setting in the Picture menu is disabled. For TH-80LFB70U, TH-80LFB70W HDMI1 Power management, HDMI2 Power management When this function is set to On, it operates under the following conditions to turn the power on or off automatically.

  • Page 66: Customizing The Input Labels

    VCR / STB / (Skip) [DIGITAL LINK] DIGITAL LINK / (Skip) [Miracast(TM)] Miracast(TM) / (Skip) [Panasonic APPLICATION] Panasonic APPLICATION / (Skip) [MEMORY VIEWER] MEMORY VIEWER / (Skip) [WHITEBOARD] WHITEBOARD / (Skip) (Skip): The INPUT button press will skip its input.

  • Page 67: Function Button Settings

    Function Button Settings Set the functions that operates when is pressed. Function Button Settings Select “Function Button Settings” in “Setup” menu and Function Button 1 INPUT (WHITEBOARD) press button. Function Button 2 INPUT (MEMORY VIEWER) Function Button Guide • Function Button 1, Function Button 2 Note: Factory settings are as follows.

  • Page 68: Memory Viewer Settings

    Memory Viewer Settings Set the display styled of the Memory Viewer screen and Auto Play settings. Select “Memory Viewer Settings” in “Setup” menu and press button. Memory Viewer Settings Thumbnail View Sort Name Auto Play Interval Wipe left Effect Guide View Switches the thumbnail and list views.

  • Page 69: No Activity Power Off

    No activity power off Disable Enable When this function is set to “Enable”, the power is turned off (standby) automatically when there is no operation of the Display for 4 hours. Starting from 3 minutes before the turn off, the remaining time will be displayed. Press any key to abort.

  • Page 70: Setup For Input Signals

    Setup for Input Signals Component / RGB-in select Component Select to match the signals from the source connected to the Component / RGB or PC input terminals. Y, P signals “Component” RGB signals “RGB” Note: Make setting of the selected input terminal (COMPONENT/RGB IN or PC IN). YUV / RGB-in select Select to match the signals from the source connected to the DVI input terminals.

  • Page 71: Signal Menu

    Setup for Input Signals Signal menu Notes: • “Signal” setup menu displays a different setting condition for each input signal. • Depending on the input signal type, an optional Terminal Board may be required. Select “Signal” in “Setup” menu and press button.
  • Page 72 Setup for Input Signals • Sync This function operates only during input from PC IN terminal. Setting RGB sync signal Con¿ rm that the input is set to RGB input (this setting is valid only for RGB input signal). Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync. on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.

  • Page 73: Noise Reduction

    Setup for Input Signals • Noise reduction Sets the following three NR (Noise Reduction) functions together. P-NR, Mosquito NR, Block NR Advanced Advanced NR Sets the three NR functions separately. Noise reduction Advanced Press to select “Advanced”. P-NR Mosquito NR Block NR Press to select P-NR, Mosquito NR or Block NR.

  • Page 74: Options Adjustments

    VIDEO COMPONENT* DIGITAL LINK Miracast(TM) Panasonic APPLICATION MEMORY VIEWER WHITEBOARD *1 “SLOT INPUT” is displayed when an optional Terminal Board is installed. When a Terminal Board with dual input terminals is installed, “SLOT INPUT A” and “SLOT INPUT Initial input B”...
  • Page 75 VIDEO COMPONENT* DIGITAL LINK Miracast(TM) Panasonic APPLICATION MEMORY VIEWER WHITEBOARD *1 “SLOT INPUT” is displayed when an optional Terminal Board is installed. When a Terminal Board with dual input terminals is installed, “SLOT INPUT A” and “SLOT INPUT B” are displayed.
  • Page 76 Select the LAN control protocol. LAN Control Protocol 1: Control with the Panasonic Display sequence. Protocol Protocol 2: Control with the sequence that compatible with Panasonic Projector. RS-232C/LAN Set up the informing manner if error warning occured. (see page 79) Information Timing...

  • Page 77: Weekly Command Timer

    Options Adjustments Item Adjustments Whether to show/hide No activity power off Precautions at the time of power ON is set. Power On Message On: The warning precautions are shown at the time of power ON. (No activity power Off: The warning precautions are not shown at the time of power ON. off) Note: This setting is enabled only if “No activity power off”...
  • Page 78 Options Adjustments Press to select a command number. Press to show the previous / next command pages (1-8) of the selected program. Press to show the command setting screen. Weekly Command Timer Weekly Command Timer Program Program 8:00 20:00 AVL:00 10:30 IMS:SL1 20:30 DAM:NORM ––:––...

  • Page 79: Audio Input Select

    SLOT INPUT A / SLOT INPUT B / AUDIO 1 / AUDIO 2 / Miracast(TM) / NO AUDIO [Panasonic APPLICATION] SLOT INPUT A / SLOT INPUT B / AUDIO 1 / AUDIO 2 / Panasonic APPLICATION / NO AUDIO [MEMORY VIEWER] SLOT INPUT A / SLOT INPUT B / AUDIO 1 / AUDIO 2 / MEMORY VIEWER / NO AUDIO...

  • Page 80: Input Search

    SLOT INPUT* VIDEO COMPONENT DIGITAL LINK Panasonic APPLICATION * “SLOT INPUT” is displayed when an optional Terminal Board is installed. When a Terminal Board with dual input terminals is installed, “SLOT INPUT A” and “SLOT INPUT B” are displayed. Notes: •...

  • Page 81: Rs-232C/Lan Information Timing

    Options Adjustments RS-232C/LAN Information Timing Set up the informing manner for no signal or temperature rising. While RS-232C controls: Warning or error message sent on the display atuomatically. While LAN controls: Acquire the warning or error message from the display. select Options Press ACTION ( ) button...

  • Page 82: Troubleshooting

    Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below. Symptoms Checks Picture Sound Electrical Appliances Cars / Motorcycles Interference Noisy Sound Fluorescent light Volume (Check whether the mute function has been activated on the remote control.) Normal Picture No Sound Not plugged into AC outlet...
  • Page 83 Troubleshooting Symptoms Checks The LAN is uncontrollable* Check whether the connection has been made properly. Check whether “Control I/F Select” is “DIGITAL LINK/LAN” when controlling with the WEB browser control or the command control. Check whether “LAN Setup” has been con¿ gured properly. When connecting to a device of AMX, Crestron Electronics, Inc., or Extron, set “AMX D.D.”, “Crestron Connected™”, or “Extron XTP”...

  • Page 84: When Using Miracast

    Troubleshooting When using Miracast Please refer to the following items if you have problems with the Miracast connection. Miracast cannot be connected. • Is the “Wireless LAN” menu set to “Off”? • Is the input source [Miracast(TM)] selected correctly? • Please check the setting of the Miracast-certi¿ ed device. For details about the connection method of Miracast, refer to the Operating Instructions of the Miracast-certi¿...

  • Page 85: List Of Aspect Modes

    List of Aspect Modes For TH-80LFB70U Aspect mode Description All Aspect: Factory setting Picture Enlarged screen All Aspect: Off The display of the pictures ¿ lls the screen. In the case of SD signals, pictures with a 4:3 aspect ratio are enlarged horizontally, and displayed. This...
  • Page 86 List of Aspect Modes For TH-80LFB70E, TH-80LFB70W Aspect mode Description All Aspect: Factory setting Picture Enlarged screen All Aspect: Off The display of the pictures ¿ lls the screen. In the case of SD signals, pictures with a 4:3 aspect ratio are enlarged horizontally, and displayed.

  • Page 87: Applicable Input Signals

    Applicable Input Signals Mark: Applicable input signal COMPONENT / RGB DVI-D IN Horizontal frequency Vertical frequency HDMI1 Signal name IN / PC IN (Dot clock (kHz) (Hz) HDMI2 (Dot clock (MHz)) (MHz)) 525 (480) / 60i 15.73 59.94 * (13.5) * (27.0) 525 (480) / 60p 31.47...

  • Page 88: Shipping Condition

    Applicable Input Signals Video input (VIDEO) Horizontal Vertical Signal name frequency(kHz) frequency(Hz) NTSC 15.73 59.94 15.63 50.00 PAL60 15.73 59.94 SECAM 15.63 50.00 Modi¿ ed NTSC 15.73 59.94 Shipping condition This function allows you to reset the unit to the factory setting. Setup Press to display the Setup menu.

  • Page 89: Command List Of Weekly Command Timer

    Input select (DVI) (Main Picture when PIP mode) IMS:PC1 Input select (PC) (Main Picture when PIP mode) IMS:NW1 Input select (Panasonic APPLICATION) (Main Picture when PIP mode) ISS:S1A Sub Picture Input Select (SLOT INPUT A) ISS:S1B Sub Picture Input Select (SLOT INPUT B)

  • Page 90: Speci¿ Cations

    Speci¿ cations TH-80LFB70U TH-80LFB70E / TH-80LFB70W Power Source 110 - 127 V AC, 50/60 Hz 220 - 240 V AC, 50/60 Hz Power Consumption Power on 350 W 350 W Stand-by condition 0.5 W 0.5 W Power off condition 0.3 W 0.3 W...

  • Page 91: Software License

    © Panasonic Corporation 2013 This product incorporates the following software: (1) the software which is developed independently by or for Panasonic Corporation (2) the software which is licensed under the GNU GENERAL PUBLIC LICENSE (3) the software which is licensed under the GNU LESSER GENERAL PUBLIC LICENSE...
  • Page 92 Warranty Service purposes. Model Number Serial Number For TH-80LFB70U Panasonic System Communications Company of North America Unit of Panasonic Corporation of North America Executive Of¿ ce : Two Riverfront Plaza, Newark, New Jersey 07102-5490 Panasonic Canada Inc.

This manual is also suitable for:

Th-80lfb70eTh-80lfb70wTh-50lfb70uTh-65lfb70uTh-50lfb70eTh-65lfb70e ... Show all

Table of Contents