Wps Connection Setting - Pioneer X-HM81-S Operating Instructions Manual

8
8
2
Use / to select the available wireless network you
want to connect to.
Available Wireless Networks
001XXXXXX
002XXXXXX
003XXXXXX
3
Use /// to enter the Pass Phrase or WEP Key.
Enter Password
A
[REPEAT] Change Text
[CLEAR] Delete One Character
/: Moves the adjusting digit.
/: Changes displayed character.
REPEAT: Switches character types.
CLEAR: Deletes one character at a time.
4
Use / to select DHCP On, then press ENTER.
Select Use Proxy Server to setup Proxy Host Name and
Proxy Port.
Network Configuration
DHCP On
DHCP Off
If your router does not have a built-in DHCP server
function, you have to set up the network manually. Return
to step 4 and select DHCP to be Off and press ENTER.
When you select DHCP to be Off, go to step 2 of Wired
setting on page 24.

WPS connection setting

WPS is abbreviation of Wi-Fi Protected Setup. A standard
established by the Wi-Fi Alliance industry group for a function
allowing settings related to interconnection of WPS
compatible wireless LAN devices and encryption to be made
with simple operations.
This receiver supports push-button configuration and PIN
code configuration.
Network Type must be set to Wireless or Auto to use WPS
connection. When using WPS connection, be sure the LAN
cable is not connected to the receiver and turn this receiver
on.
1
Press NETWORK  SETUP on the remote control.
The Initial Setup screen is shown on the display.
2
Select Network Setting  WPS.
3
Use / to select PBC (Push Button Configuration) or
PIN Input, then press ENTER.
If your wireless device supports PBC, select PBC.
Select WPS Method
PBC (Push Button Configuration)
PIN Input
PBC (Push Button Configuration)
Connection settings are made automatically simply by
pressing the WPS buttons on the WPS compatible
wireless LAN device. Follow the instructions on the
display. This is the simplest way of making the settings,
and is possible when the WPS compatible wireless LAN
device is equipped with WPS button.
PIN INPUT
Connection settings are made by inputting the 8-digit PIN
code shown on the display to the access point to which
you selected.
Follow the instructions shown in Connecting using PIN
code configuration on the right.
Internet radio
25