Adjusting Picture Alignment Manually - Samsung DVD-V6500K Instruction Manual

Basic Operation (VCR)
Playing a Cassette
1. Switch on both the television and your DVD-VCR.
2. Insert the video cassette. If the safety tab on the cassette is intact, press the √ll (play/pause)
button. Otherwise, the cassette is played automatically.
• When a cassette is loaded, the tape position is optimized automatically to reduce distur-
bance (Digital Auto Tracking). When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically. NTSC tapes can be played back but cannot be
recorded with this DVD-VCR.
3. Press the I (stop) button to stop the playback.
Press the (eject) button to eject the playback.

Adjusting Picture Alignment Manually

This feature allows you to adjust the alignment manually to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust alignment manually by pressing the
... ... † †
TRK or button until the picture is clear and stable.
Selecting the Audio Output Mode
Press the AUDIO button on the remote control until the required option is displayed.
Option Description
L Used to listen to the sound on the left Hi-Fi channel.
R Used to listen to the sound on the right Hi-Fi channel.
MIX Used to listen to the mixed sound of the Hi-Fi and normal channels.
MONO Used to listen to the sound on the normal mono channel.
L R Used to listen to Hi-Fi stereo sound on the left and right channels
• When playing back tapes recorded in Hi-Fi, the sound switches to Hi-Fi after
five seconds of Mono.
To select the sound mode, simply press the AUDIO button on the remote control until
the required option is displayed.
➝ L ➝ R ➝ MIX
L R MONO
Playing a Cassette in Slow Motion
1. Press the :
• √ll button to start playing the cassette.
• √ll button again to make still mode.
• √√ button to start slow mode.
• œœ or √√ button as many times as required to decrease or increase the speed
respectively.
• √ll button twice to return to the normal speed.
• The slow motion feature does not support running video backwards.
2. When playing back in slow motion, picture interference may occur. Press the TRK ...
or † button to minimize this effect.
• When you have been using the Slow Motion function for more than about two min-
utes, the DVD-VCR will automatically play to protect the:
- Cassette
- Video heads
Playing a Sequence Frame by Frame
1. Press the :
• √ll button to start playing the cassette.
• √ll button again to make still mode.
• F.ADV button to advance frame by frame.
• √ll button to return to normal playback.
• Vertical stability: When playing back frame by frame, interference may be seen on
... ... † †
the screen. Press the TRK or button to minimize this effect.
Playing a Sequence at Variable Speeds
1. Press the :
• √ll button to start playing the cassette.
• SHUTTLE (<<) button to play the cassette backwards.
• SHUTTLE (>>) button to play the cassette forwards.
2. Each time you press the SHUTTLE button, the speed is changed as shown in the fol-
lowing illustration.
REVERSE REVERSE REVERSE
PLAY PLAY PLAY STILL
X9 X5 X3
SLOW SLOW PLAY PLAY PLAY
MOTION MOTION PLAY X3 X5 X9
X1/10 X1/5
7