Table of Contents
Advertisement
Playing a Cassette
GB
This function allows you to play back any pre-recorded cassette.
1
DVD
TV VIEW
VCR
2
2
3
REC
FRAME/STEP
3
REC
EJECT
3
Adjusting Picture Alignment Automatically
The Picture Alignment feature enables you to optimize the tape
STANDBY/ON
OPEN/CLOSE
position automatically to obtain the best possible picture.
TRK-
ATR
TRK+
When noise bars or streaks appear during playback, adjust picture
alignment by pressing the ATR button.
SHUTTLE
VOLUME
PROG
Result:
SVHS
S.FIT
MUTE
LAST PR
3D SOUND
A.DUB
TV/VCR
Adjusting Picture Alignment Manually
The Picture Adjustment feature allows you to adjust the alignment
STANDBY/ON
OPEN/CLOSE
manually to obtain the best possible picture.
TRK-
ATR
TRK+
When noise bars or streaks appear during playback, adjust alignment
manually by pressing the TRK (+ or -) buttons until the picture is clear and
SHUTTLE
stable.
VOLUME
PROG
SVHS
S.FIT
Result:
LAST PR
MUTE
3D SOUND
A.DUB
TV/VCR
30
Switch on both the television and your DVD-VCR.
Insert the video cassette to be played. If the safety tab on the
❿
cassette is intact, press
ll.
Otherwise, the cassette is played automatically.
When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
NTSC tapes can be played back but cannot be recorded
with this DVD-VCR.
To...
Then press...
Stop the playback
(STOP).
Eject the cassette
(EJECT).
The tracking bar appears.
The picture is automatically adjusted.
The tracking bar disappears when digital auto tracking has
been completed.
The tracking bar appears.
The image is adjusted.
The tracking bar disappears when you release the button.
Intelligent Picture Control
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1
During playback, press the SETUP button on the remote control.
Result:
The programming menu is displayed.
2
or ➛, ❿ buttons to select the
Press the corresponding
,
"
❷!
USER SET
option.
3
Press the ENTER button to select this option.
Result:
The
USER SET
menu is displayed.
4
Press the corresponding
or
buttons, until the cursor is
"
❷
placed in front of the
option.
IPC
5
Press the ❿!button to select the IPC (intelligent picture control)
option.
When intelligent picture control mode is
ON
, the sharpness
of the image is adjusted automatically.
6
To adjust the sharpness manually, press the
button to turn the
❷
IPC mode
OFF
.
7
Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
If you do not press a button within ten seconds, the
PICTURE
menu disappears automatically.
8
On completion, press the SETUP button again.
GB
PROG
OPTIONS
OPTIONS
INSTALL
CLOCK
BONUS
LANG
USER SET
➛❿!!
" ❷!!
ENTER
END:SETUP
OPTIONS
OSD
:ON
TAPE SELECT
:E180
COLOUR SYSTEM
:AUTO
❿
IPC
:ON
NICAM
:ON
❿
END:SETUP
" ❷
31
Advertisement
Table of Contents
